Wisconsin CDL study: Pre-Trip Inspection questions
This deck holds all 52 pre-trip questions, 10 free with explanations. Work by area: engine, cab and air brakes, lights, tires and wheels, coupling. Then check yourself in pre-trip run 1.
Free Pre-Trip Inspection questions questions for the Wisconsin CDL test
Plain-text version of this question set
What is the minimum tread depth for front tires on a commercial vehicle in Wisconsin?
- A. 2/32 of an inch
- B. 6/32 of an inch
- C. 8/32 of an inch
- D. 4/32 of an inch
Hint: Front tires have a stricter tread requirement than other tires because they are critical for steering.
Explanation: Front tires on a commercial vehicle must have at least 4/32 of an inch of tread depth. Other tires must have at least 2/32 of an inch. Proper tread is especially important for Wisconsin's wet and icy roads.
During a pre-trip inspection, how do you test the parking brake?
- A. Release the parking brake and check for leaks
- B. Apply the parking brake and pull forward gently
- C. Pump the brake pedal 10 times in a row
- D. Check the brake fluid level only
Hint: The test involves engaging the brake and then attempting a specific action to verify it holds.
Explanation: To test the parking brake, set it and then gently try to move the vehicle forward. The parking brake should hold the vehicle in place. If it doesn't, the vehicle is unsafe to drive.
During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?
- A. 60 seconds
- B. 30 seconds
- C. 90 seconds
- D. 45 seconds
Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.
Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.
Which step of the FMCSA seven-step inspection is the parking brake and service brake test?
- A. Step 2 - Engine compartment
- B. Step 7 - Start the engine and check the brake system
- C. Step 3 - Start engine and inspect inside the cab
- D. Step 5 - Walk-around inspection
Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out.
Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab.
When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?
- A. Mirrors must be tinted to reduce sun glare
- B. Only the driver-side mirror must be checked
- C. Windshields may have any size crack as long as it is not in the driver's line of sight
- D. Mirrors and glass must be clean, adjusted, and undamaged
Hint: If you cannot see clearly out of it, it is a defect.
Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.
What is the minimum legal tread depth for STEERING (front) axle tires on a commercial motor vehicle?
- A. 4/32 inch
- B. 2/32 inch
- C. 6/32 inch
- D. 8/32 inch
Hint: Steering tires need DOUBLE the tread of other tires because they handle directional control.
Explanation: Steering-axle tires must have at least 4/32 inch of tread in every major groove.
While checking the wheels and rims, which of the following indicates a defect?
- A. Cracked rims, missing or loose lug nuts, or rust trails
- B. Lug nuts that are clean and tightened to the specified torque
- C. A rim with a uniform painted finish
- D. Wheel hubs that show no signs of oil leakage
Hint: Rust streaks from lug nuts are a classic warning sign on the skills test.
Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention.
During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is:
- A. 2 psi per minute
- B. 4 psi per minute
- C. 3 psi per minute
- D. 6 psi per minute
Hint: Combinations have more hoses, so they are allowed slightly more leakage.
Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute.
Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?
- A. Service = red, Emergency = blue
- B. Service = blue, Emergency = red
- C. Service = green, Emergency = yellow
- D. Service = yellow, Emergency = green
Hint: Emergency is the color of an emergency light.
Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.
What is a Driver Vehicle Inspection Report (DVIR), and when must one be prepared?
- A. A weekly summary of mileage and fuel use, prepared every Friday for the office
- B. A document filed only when an accident occurs
- C. A written report of vehicle condition and defects, done at each day's end
- D. A fuel-purchase log; prepared at each fuel stop
Hint: It is a daily written record of the vehicle's condition.
Explanation: At the end of each driving day, you must write a DVIR for each vehicle you drove. It must list any defects that affect safe driving, or say that none were found.
There are 52 questions in this pool, and 47 cover the inspection routine itself. Four were written for Wisconsin. Two are air brake checks you will do in the cab: when the low pressure warning must come on and how much pressure a combination may lose in a minute with the engine off and brakes applied. The others cover tread depth on steering tires and how to test the parking brake by pulling forward gently.
The general knowledge pool adds more Wisconsin inspection items, such as what to check in the engine compartment and how often lights and reflectors are inspected. Study both.
Say every item aloud and point at it as you practice. Testers grade what you name and explain, so a silent check counts for nothing.
Key Topics
- Wisconsin air brake check questions
- Tread depth and parking brake test
- Engine compartment and leaks
- Lights, reflectors and coupling
- Banked segments and permit renewal