Skip to content

Virginia CDL study: Pre-Trip Inspection questions

The pre-trip deck has all 51 questions, with 10 free and explained. Most cover the walk-around, so go system by system: engine, cab, lights, tires, brakes, coupling. Then take pre-trip run 1 to check your recall.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 51 questions are free. The rest are in Pro.

During a pre-trip inspection, what is the minimum tread depth required for front (steering) tires on a commercial vehicle?

Free Pre-Trip Inspection questions questions for the Virginia CDL test

Plain-text version of this question set

  1. During a pre-trip inspection, what is the minimum tread depth required for front (steering) tires on a commercial vehicle?

    • A. 4/32 of an inch
    • B. 2/32 of an inch
    • C. 6/32 of an inch
    • D. 8/32 of an inch

    Hint: Steering tires have a stricter tread requirement than other tires because they control vehicle direction.

    Explanation: Front (steering) tires must have at least 4/32 of an inch of tread depth. Other tires must have at least 2/32 of an inch.

  2. During a pre-trip inspection, what is the maximum allowable brake drum crack length before the vehicle must be placed out of service?

    • A. One-half of the drum width
    • B. Any visible crack
    • C. One-quarter of the drum width
    • D. Three-quarters of the drum width

    Hint: The crack limit relates to the drum's structural integrity and its ability to contain braking forces.

    Explanation: A brake drum with a crack longer than half its width must be taken out of service. Any crack is a concern, but cracks exceeding half the width are immediately disqualifying.

  3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?

    • A. 60 seconds
    • B. 30 seconds
    • C. 90 seconds
    • D. 45 seconds

    Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.

    Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.

  4. Per FMCSA, how often must a CDL driver inspect their commercial vehicle?

    • A. Once per week
    • B. Before every trip and after every trip
    • C. Only at the start of each day
    • D. Only when the vehicle has been flagged for a defect

    Hint: Inspection is not a one-time event; safety checks bracket every shift and continue while driving.

    Explanation: Federal regulations require a pre-trip inspection before driving, en-route monitoring, and a post-trip inspection with a written DVIR at the end of each day.

  5. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?

    • A. Mirrors must be tinted to reduce sun glare
    • B. Only the driver-side mirror must be checked
    • C. Windshields may have any size crack as long as it is not in the driver's line of sight
    • D. Mirrors and glass must be clean, adjusted, and undamaged

    Hint: If you cannot see clearly out of it, it is a defect.

    Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.

  6. While checking the wheels and rims, which of the following indicates a defect?

    • A. Cracked rims, missing or loose lug nuts, or rust trails
    • B. Lug nuts that are clean and tightened to the specified torque
    • C. A rim with a uniform painted finish
    • D. Wheel hubs that show no signs of oil leakage

    Hint: Rust streaks from lug nuts are a classic warning sign on the skills test.

    Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention.

  7. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is:

    • A. 2 psi per minute
    • B. 4 psi per minute
    • C. 3 psi per minute
    • D. 6 psi per minute

    Hint: Combinations have more hoses, so they are allowed slightly more leakage.

    Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute.

  8. What component on a tractor-trailer fifth-wheel coupling locks around the kingpin?

    • A. The locking jaws
    • B. The release handle for the lock
    • C. The trailer skid plate
    • D. The frame mounting bracket

    Hint: Their name describes what they do.

    Explanation: The locking jaws inside the fifth wheel close around the kingpin to secure the trailer. After coupling, you must visually confirm the jaws are fully closed around the kingpin.

  9. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?

    • A. Service = red, Emergency = blue
    • B. Service = blue, Emergency = red
    • C. Service = green, Emergency = yellow
    • D. Service = yellow, Emergency = green

    Hint: Emergency is the color of an emergency light.

    Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.

  10. What is the purpose of mud flaps (splash guards) on a tractor-trailer?

    • A. Decoration
    • B. To prevent water, mud, rocks, and debris from being thrown onto other vehicles
    • C. To improve fuel economy
    • D. To balance the trailer's weight evenly across both of the rear axle groups

    Hint: They keep the truck from throwing rocks and water at cars behind.

    Explanation: Mud flaps reduce spray and projectile debris from rear wheels. Most states require them; they must be properly mounted, not torn, not dragging on the ground, and the correct distance from the road surface.

This section has 51 questions, and 45 of them cover the walk-around itself, with single questions on tires, lights, brakes and air brake checks. Five were written for Virginia: how often a Virginia CDL driver must inspect the vehicle (before each trip or shift), what to check on the lighting system, acceptable leak rate during the applied pressure test on a combination, minimum tread depth for steering tires, and how much drum cracking puts a vehicle out of service. Learn those limits from the manual rather than from the questions.

If you fail any part of the skills test, you can try again once per business day. A pass stays valid for six months, so you have time to finish the remaining parts and get licensed. Practice saying each item aloud as you point at it, since the examiner grades what you name.

Key Topics

  • Virginia daily inspection and lighting questions
  • Engine compartment and fluid leaks
  • Tires, wheels and brake drums
  • Air brake checks in the cab
  • Coupling and lighting walk-around