Pennsylvania CDL study: Safe driving, vehicle control and cargo
Two decks cover the 114 General Knowledge questions for Pennsylvania: 77 on safe driving and cargo, 37 on rules and licensing. Each shows 10 free, with the answer and the reasoning. Read one deck at a sitting, then see how much stayed with you on General Knowledge run 1.
Question Map
10 of 77 questions are free. The rest are in Pro.
Free Safe driving, vehicle control and cargo questions for the Pennsylvania CDL test
Plain-text version of this question set
When driving a commercial vehicle down a steep Appalachian mountain grade in Pennsylvania, what is the correct technique to control speed?
- A. Shift to a lower gear and use engine braking
- B. Ride the service brakes continuously all the way down
- C. Coast in neutral to save fuel on the grade
- D. Apply the parking brake intermittently downhill
Hint: Continuous brake application on long downgrades causes brake fade, so the engine must do most of the work.
Explanation: Before descending a steep grade, shift into a lower gear and use the engine's braking effect as the primary means of speed control. Light, intermittent brake application supplements engine braking. Riding the brakes causes them to overheat and fade.
Which commercial vehicles are required to stop at all railroad crossings in Pennsylvania, even when no train is approaching?
- A. Only empty flatbed trucks and car carriers
- B. Only school buses carrying students
- C. No commercial vehicle is ever required to stop there
- D. Buses, placarded hazmat, and cargo tank vehicles
Hint: Certain types of commercial vehicles must stop at every railroad crossing due to the catastrophic consequences of a collision.
Explanation: Buses carrying passengers, vehicles placarded for hazardous materials, and cargo tank vehicles (loaded or empty) must stop at all railroad crossings between 15 and 50 feet from the nearest rail.
What should you do if your low air pressure warning comes on while driving?
- A. Continue driving but avoid using the brakes until pressure rebuilds
- B. Increase engine speed to help the compressor build pressure faster
- C. Stop and safely park as soon as possible
- D. Turn off the air dryer and switch to manual mode
Hint: A low air pressure warning while driving requires immediate action to prevent complete brake failure.
Explanation: If the low air pressure warning activates, you should stop and safely park as soon as possible. Continued driving risks losing braking ability entirely if pressure drops further, which would engage the spring brakes uncontrollably.
The longer the combination vehicle, the more the trailer will off-track. What should a driver do when making a right turn with a long trailer?
- A. Speed up through the turn to reduce off-tracking
- B. Turn the steering wheel quickly to complete the turn faster
- C. Turn from the far right lane to minimize the turning arc
- D. Swing wide to the left before turning right
Hint: Longer vehicles have more severe off-tracking, requiring a specific turning technique.
Explanation: With longer combination vehicles, drivers should swing wide or use a jug handle turn, moving slightly to the left before turning right to give the trailer wheels room to clear the curb and any objects on the inside of the turn.
When inspecting tires during a pre-trip inspection, which condition would require the tire to be replaced before driving?
- A. A minor scuff mark on the sidewall
- B. Tread depth of less than 2/32 of an inch on a steer tire
- C. A tread depth of 5/32 of an inch on a drive tire
- D. Slightly uneven tread wear across the tire
Hint: Steer tires have stricter tread depth requirements than drive or trailer tires because they control the vehicle's direction.
Explanation: Front (steer) tires must have at least 4/32 of an inch tread depth and all other tires at least 2/32. A steer tire with less than 2/32 tread depth is well below the legal minimum and must be replaced immediately.
What can happen if too much cargo weight is placed on the front axle of a truck?
- A. The rear tires will blow out
- B. The front tires can fail or steering can be impaired
- C. The vehicle will understeer and have difficulty turning
- D. The engine will overheat from the extra load
Hint: Overloading the front axle affects the most critical vehicle control system.
Explanation: Overloading the front axle can cause front tire failure and make steering extremely difficult or unresponsive. Proper weight distribution is essential for safe steering and braking.
What is the purpose of a header board (headache rack) on a flatbed truck?
- A. To provide a mounting point for clearance lights
- B. To reduce wind resistance and improve fuel economy
- C. To protect the cab from forward-shifting cargo
- D. To support tarps covering the load
Hint: The header board protects the cab from cargo that shifts forward during braking.
Explanation: A header board (headache rack) is mounted behind the cab to protect the driver from cargo that shifts forward during hard braking or a collision. It acts as a barrier between the cargo and the cab.
Where must hazardous materials shipping papers be kept while driving?
- A. In the glove compartment
- B. In the trailer with the cargo
- C. In a pouch on the driver's door
- D. In a locked box mounted behind the cab
Hint: Shipping papers for hazmat must be immediately accessible to the driver and to emergency responders.
Explanation: Shipping papers for hazardous materials must be kept in a pouch on the driver's door or in clear view and within the driver's reach while the seat belt is fastened. This allows quick access in an emergency.
Standee passengers on a bus are allowed:
- A. Anywhere on the bus as long as total capacity is not exceeded
- B. Only on buses traveling less than 25 mph
- C. Only on buses with a GVWR under 20,000 lbs
- D. Only behind the standee line marked on the floor
Hint: Standing passengers on a bus are only permitted in a designated area of the vehicle.
Explanation: Standing passengers (standees) are allowed only behind the standee line, which is typically marked on the floor near the front of the bus. They must not stand in front of the rear of the driver's seat.
When driving a large commercial vehicle down a long, steep downgrade, you should:
- A. Place the vehicle in neutral to reduce wear on the engine
- B. Ride the brakes continuously to maintain a safe speed
- C. Use a low gear and apply brakes intermittently with firm pressure
- D. Accelerate slightly to maintain momentum
Hint: Going down a long grade in a heavy vehicle requires a specific technique to prevent brake failure from overheating.
Explanation: On long downgrades, use a low gear to let the engine help slow the vehicle and apply brakes with firm, intermittent pressure. Riding the brakes continuously causes them to overheat and fade, potentially resulting in total brake failure.
Pennsylvania wrote 44 of these 114 questions for its own roads. Several come from the terrain: how to control speed on a steep Appalachian downgrade by gearing down first, how far to stretch following distance on snow, and what to check before approaching one of the state's many covered bridges, namely the posted height and weight limits. Others draw on the state's freight, such as blocking and bracing for steel coils and covering coal loads before they reach a public road. You will also see merging onto the PA Turnpike from a toll plaza and the rule that a DUI in your personal car still disqualifies your CDL.
The remainder follows the national manual: classes, endorsements, alcohol limits, hours of service, railroad crossings and securement checks. Two traps catch people. Class A depends on a towed unit over 10,000 pounds, and a Pennsylvania CDL issued under 21 keeps you inside the state. The study cards split the pool into 77 safe driving and cargo questions and 37 rules and licensing questions, 10 free in each.
Key Topics
- Pennsylvania mountain grades, covered bridges and the Turnpike
- Steel coil and coal load securement
- CDL classes and the under-21 intrastate limit
- Alcohol limits and DUI disqualification
- Railroad crossings and evacuation
- Shipping papers and placards