Montana CDL study: Licensing, rules and limits
Two decks split Montana's 113 General Knowledge questions: 75 on safe driving and cargo, 38 on rules and licensing. Each deck shows 10 free, with the reason behind every answer. When a deck feels solid, check it on General Knowledge run 1.
Free Licensing, rules and limits questions for the Montana CDL test
Plain-text version of this question set
Where must a Montana CDL applicant go to take the CDL skills test?
- A. Any local police station in the state
- B. The Montana Highway Patrol headquarters only
- C. A Montana MVD office or third-party tester
- D. Any licensed auto dealership
Hint: Montana uses a different name than most states for its driver licensing agency.
Explanation: CDL skills tests in Montana are administered by the Motor Vehicle Division (MVD) or authorized third-party testers. Montana uses MVD rather than DMV for driver licensing services.
What should a CDL driver do if a roadside inspection places the vehicle out of service in Montana?
- A. Continue driving on to the nearest repair shop
- B. The vehicle cannot move until defects are fixed
- C. Drive at a reduced speed to the destination
- D. Call the dispatcher to get permission to continue
Hint: An out-of-service order is a legal prohibition against moving the vehicle until specific conditions are met.
Explanation: An out-of-service order means the vehicle cannot be driven until the identified defects have been corrected. Driving an out-of-service vehicle is a serious violation that can result in fines and CDL disqualification.
A driver needs a Class C CDL to operate which of the following vehicles?
- A. A straight truck weighing 30,000 lbs
- B. A bus designed to carry 16 or more passengers, including the driver
- C. A tractor-trailer with a GCWR of 40,000 lbs
- D. A pickup truck towing a flatbed trailer totaling 15,000 lbs
Hint: Class C covers vehicles that may not be exceptionally heavy but carry passengers or hazmat.
Explanation: A Class C CDL is required for vehicles designed to transport 16 or more passengers (including the driver) or vehicles placarded for hazardous materials that do not meet Class A or B requirements.
What does the X endorsement on a CDL allow a driver to do?
- A. Drive extra-long combination vehicles only
- B. Haul hazardous materials in a tanker
- C. Operate vehicles with air brakes
- D. Pull triple trailers
Hint: The X endorsement is a combination of two individual endorsements.
Explanation: The X endorsement is a combination of the H (Hazardous Materials) and N (Tank Vehicle) endorsements, allowing a driver to haul hazardous materials in a tank vehicle.
If the previous driver's DVIR lists a defect that has been certified as repaired, what must the current driver do?
- A. Refuse to drive until a mechanic re-inspects the vehicle
- B. File a new report with the FMCSA
- C. Review the report, confirm repairs, and sign the DVIR
- D. Call the previous driver to verify the repair was made
Hint: When the previous driver reported a defect, the current driver must verify the repair before driving.
Explanation: The current driver must review the previous DVIR, confirm that any listed defects have been repaired or are noted as not needing repair, sign the report acknowledging they reviewed it, and conduct their own pre-trip inspection.
What is the federal maximum gross vehicle weight for a commercial motor vehicle on interstate highways?
- A. 100,000 lbs
- B. 60,000 lbs
- C. 80,000 lbs
- D. 90,000 lbs
Hint: There is a maximum total weight for commercial vehicles on interstate highways.
Explanation: The federal maximum gross vehicle weight for commercial motor vehicles operating on interstate highways is 80,000 lbs. Some states may issue overweight permits for loads exceeding this limit.
Most CDL drivers are now required to use which device instead of paper logbooks to track their hours of service?
- A. A GPS navigation system
- B. A dashboard camera (dashcam)
- C. A smartphone app approved by the driver's company
- D. An Electronic Logging Device (ELD)
Hint: Paper logbooks have been largely replaced by a mandatory electronic system for tracking driving hours.
Explanation: The ELD mandate requires most commercial motor vehicle drivers to use Electronic Logging Devices to record their hours of service automatically. ELDs connect to the vehicle's engine to record driving time accurately.
Under the 60/70-hour rule, a property-carrying CMV driver who has worked 70 hours in 8 consecutive days may not drive again until:
- A. They have taken at least 10 consecutive hours off duty
- B. Enough hours fall off, or they take a 34-hour restart
- C. They have taken a 30-minute break
- D. They obtain a waiver from their employer
Hint: The 60/70-hour rule limits total on-duty time over a rolling period, but there is a way to reset the clock.
Explanation: Once a driver reaches 70 hours of on-duty time in 8 days, they cannot drive until hours fall off the rolling 8-day period, or they take a valid 34-hour restart to reset the clock.
What is the maximum blood alcohol concentration (BAC) at which a CDL holder can legally operate a commercial motor vehicle?
- A. 0.02%
- B. 0.08%
- C. 0.06%
- D. 0.04%
Hint: CDL holders are held to a stricter blood alcohol standard than regular drivers.
Explanation: CDL holders are subject to a BAC limit of 0.04% when operating a commercial motor vehicle, which is half the standard 0.08% limit for non-commercial drivers.
A CDL holder convicted of a DUI while driving a CMV for the first time will be disqualified for how long?
- A. 6 months
- B. 3 years
- C. 1 year
- D. Life
Hint: A first DUI conviction while driving a CMV results in a significant mandatory disqualification period.
Explanation: A first DUI conviction while driving a commercial vehicle means a 1-year CDL disqualification under federal rules. If the driver was hauling hazardous materials that need placards, it is 3 years instead. 6 months is too short, and a lifetime ban applies only to a second major offense, not a first.
Montana roads shape 43 of the 113 questions here. You will be asked what to do about elk or bison in the road (brake firmly and stay in your lane, since swerving can roll the truck), how to handle black ice, and why bridges, overpasses and shaded curves freeze first. Mountain driving gets its own set: picking the low gear before the descent, not after, snub braking and brake fade on long grades, plus the steep grades, sharp curves and closures around Glacier National Park.
Farm freight shows up too. Grain shifts and raises the center of gravity, and live cattle move on their own, changing how the truck brakes and turns. Other questions cover the farm exemption, the MDT permit for oversize loads, and the old no-daytime-speed-limit days (today you follow posted limits). The study cards divide the pool into 75 safe driving and cargo questions and 38 rules and licensing questions, with 10 free in each deck.
Key Topics
- Montana mountain passes, black ice and wildlife
- Grain and cattle loads, oversize permits
- Type 1 and Type 2 licensing ages
- Cargo securement and weight distribution
- Hours of service and disqualifications
- Railroad crossings and emergencies