Skip to content

Kansas CDL study: Pre-Trip Inspection questions

All 50 Kansas pre-trip questions are in this deck, 10 free with explanations. Work through it in the order you will walk the vehicle and say each item out loud. When you can do that without the cards, try pre-trip run 1.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 50 questions are free. The rest are in Pro.

What is the minimum tread depth required for front tires on a commercial vehicle in Kansas?

Free Pre-Trip Inspection questions questions for the Kansas CDL test

Plain-text version of this question set

  1. What is the minimum tread depth required for front tires on a commercial vehicle in Kansas?

    • A. 2/32 inch
    • B. 6/32 inch
    • C. 8/32 inch
    • D. 4/32 inch

    Hint: Front tires have a stricter tread requirement than other tires because they handle steering.

    Explanation: Front tires on a commercial vehicle must have a minimum tread depth of 4/32 inch. Other tires must have at least 2/32 inch of tread depth.

  2. During a pre-trip inspection, what should you check about the brake drums?

    • A. That they are not cracked, dented, or have holes
    • B. That they are painted the correct color
    • C. That they have been replaced within the last year
    • D. That they are warm to the touch

    Hint: A pre-trip brake inspection involves visual examination of the brake components for physical damage.

    Explanation: During a pre-trip inspection, check that brake drums are not cracked, dented, or have holes. Damaged brake drums can lead to brake failure and are an out-of-service violation.

  3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?

    • A. 60 seconds
    • B. 30 seconds
    • C. 90 seconds
    • D. 45 seconds

    Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.

    Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.

  4. Which step of the FMCSA seven-step inspection is the parking brake and service brake test?

    • A. Step 2 - Engine compartment
    • B. Step 7 - Start the engine and check the brake system
    • C. Step 3 - Start engine and inspect inside the cab
    • D. Step 5 - Walk-around inspection

    Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out.

    Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab.

  5. Per FMCSA, how often must a CDL driver inspect their commercial vehicle?

    • A. Once per week
    • B. Before every trip and after every trip
    • C. Only at the start of each day
    • D. Only when the vehicle has been flagged for a defect

    Hint: Inspection is not a one-time event; safety checks bracket every shift and continue while driving.

    Explanation: Federal regulations require a pre-trip inspection before driving, en-route monitoring, and a post-trip inspection with a written DVIR at the end of each day.

  6. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?

    • A. Mirrors must be tinted to reduce sun glare
    • B. Only the driver-side mirror must be checked
    • C. Windshields may have any size crack as long as it is not in the driver's line of sight
    • D. Mirrors and glass must be clean, adjusted, and undamaged

    Hint: If you cannot see clearly out of it, it is a defect.

    Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.

  7. While checking the wheels and rims, which of the following indicates a defect?

    • A. Cracked rims, missing or loose lug nuts, or rust trails
    • B. Lug nuts that are clean and tightened to the specified torque
    • C. A rim with a uniform painted finish
    • D. Wheel hubs that show no signs of oil leakage

    Hint: Rust streaks from lug nuts are a classic warning sign on the skills test.

    Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention.

  8. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is:

    • A. 2 psi per minute
    • B. 4 psi per minute
    • C. 3 psi per minute
    • D. 6 psi per minute

    Hint: Combinations have more hoses, so they are allowed slightly more leakage.

    Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute.

  9. What component on a tractor-trailer fifth-wheel coupling locks around the kingpin?

    • A. The locking jaws
    • B. The release handle for the lock
    • C. The trailer skid plate
    • D. The frame mounting bracket

    Hint: Their name describes what they do.

    Explanation: The locking jaws inside the fifth wheel close around the kingpin to secure the trailer. After coupling, you must visually confirm the jaws are fully closed around the kingpin.

  10. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?

    • A. Service = red, Emergency = blue
    • B. Service = blue, Emergency = red
    • C. Service = green, Emergency = yellow
    • D. Service = yellow, Emergency = green

    Hint: Emergency is the color of an emergency light.

    Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.

Kansas law gives you other testers too. It allows approved third-party skills testers, and since 2024 KDOR must authorize any community or technical college that asks to give the test. If you train at one, ask whether it tests on site.

Our pool has 50 questions, 46 on the pre-trip itself. Three are written for Kansas: what to check on brake drums, the minimum tread on front tires, and which inspection a driver must do before every trip. The Kansas general knowledge pool adds which fluids to check in the engine compartment and which brake defects put a truck out of service at a roadside inspection.

On the real exam you point and explain, out loud. The written questions here build the vocabulary; practice saying each item, what you check and what a defect looks like, in the same order each time.

Key Topics

  • Kansas skills exam: offices, fees and retests
  • Brake drums and tires
  • Engine compartment fluids
  • Out-of-service brake defects
  • Inspection order and spoken checklist