# Kansas CDL Pre-Trip Inspection practice questions (free set) Kansas law gives you other testers too. It allows approved third-party skills testers, and since 2024 KDOR must authorize any community or technical college that asks to give the test. If you train at one, ask whether it tests on site. Interactive version with answers, hints and explanations: https://dmv-iq.com/kansas-cdl-pre-trip-inspection-test/study/all-questions/ ## About the Kansas CDL Pre-Trip Inspection knowledge test - Issuing agency: DOR - Passing score: 80% - Source: the Kansas Commercial Driver's License Manual ## Topics covered - Kansas skills exam: offices, fees and retests - Brake drums and tires - Engine compartment fluids - Out-of-service brake defects - Inspection order and spoken checklist ## The 10 free questions This set has 50 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. What is the minimum tread depth required for front tires on a commercial vehicle in Kansas? - A. 2/32 inch - B. 6/32 inch - C. 8/32 inch - D. 4/32 inch Hint: Front tires have a stricter tread requirement than other tires because they handle steering. Explanation: Front tires on a commercial vehicle must have a minimum tread depth of 4/32 inch. Other tires must have at least 2/32 inch of tread depth. ### 2. During a pre-trip inspection, what should you check about the brake drums? - A. That they are not cracked, dented, or have holes - B. That they are painted the correct color - C. That they have been replaced within the last year - D. That they are warm to the touch Hint: A pre-trip brake inspection involves visual examination of the brake components for physical damage. Explanation: During a pre-trip inspection, check that brake drums are not cracked, dented, or have holes. Damaged brake drums can lead to brake failure and are an out-of-service violation. ### 3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long? - A. 60 seconds - B. 30 seconds - C. 90 seconds - D. 45 seconds Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi. Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem. ### 4. Which step of the FMCSA seven-step inspection is the parking brake and service brake test? - A. Step 2 - Engine compartment - B. Step 7 - Start the engine and check the brake system - C. Step 3 - Start engine and inspect inside the cab - D. Step 5 - Walk-around inspection Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out. Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab. ### 5. Per FMCSA, how often must a CDL driver inspect their commercial vehicle? - A. Once per week - B. Before every trip and after every trip - C. Only at the start of each day - D. Only when the vehicle has been flagged for a defect Hint: Inspection is not a one-time event; safety checks bracket every shift and continue while driving. Explanation: Federal regulations require a pre-trip inspection before driving, en-route monitoring, and a post-trip inspection with a written DVIR at the end of each day. ### 6. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement? - A. Mirrors must be tinted to reduce sun glare - B. Only the driver-side mirror must be checked - C. Windshields may have any size crack as long as it is not in the driver's line of sight - D. Mirrors and glass must be clean, adjusted, and undamaged Hint: If you cannot see clearly out of it, it is a defect. Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view. ### 7. While checking the wheels and rims, which of the following indicates a defect? - A. Cracked rims, missing or loose lug nuts, or rust trails - B. Lug nuts that are clean and tightened to the specified torque - C. A rim with a uniform painted finish - D. Wheel hubs that show no signs of oil leakage Hint: Rust streaks from lug nuts are a classic warning sign on the skills test. Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention. ### 8. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is: - A. 2 psi per minute - B. 4 psi per minute - C. 3 psi per minute - D. 6 psi per minute Hint: Combinations have more hoses, so they are allowed slightly more leakage. Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute. ### 9. What component on a tractor-trailer fifth-wheel coupling locks around the kingpin? - A. The locking jaws - B. The release handle for the lock - C. The trailer skid plate - D. The frame mounting bracket Hint: Their name describes what they do. Explanation: The locking jaws inside the fifth wheel close around the kingpin to secure the trailer. After coupling, you must visually confirm the jaws are fully closed around the kingpin. ### 10. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line? - A. Service = red, Emergency = blue - B. Service = blue, Emergency = red - C. Service = green, Emergency = yellow - D. Service = yellow, Emergency = green Hint: Emergency is the color of an emergency light. Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly. ## More - [Kansas CDL Pre-Trip Inspection test](https://dmv-iq.com/kansas-cdl-pre-trip-inspection-test/) - [Kansas CDL Pre-Trip Inspection practice run 1](https://dmv-iq.com/kansas-cdl-pre-trip-inspection-test/test-1/) - [Kansas CDL practice test](https://dmv-iq.com/kansas-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.