Skip to content

Hawaii CDL study: Safe driving, vehicle control and cargo

The 112 Hawaii General Knowledge questions are split into two decks: 77 on safe driving and cargo and 35 on rules and licensing. Each deck shows 10 free, with answers and reasons. Finish a deck, then test what stuck on General Knowledge run 1.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 77 questions are free. The rest are in Pro.

What is brake fade?

Free Safe driving, vehicle control and cargo questions for the Hawaii CDL test

Plain-text version of this question set

  1. What is brake fade?

    • A. A condition where brakes get stronger the more they are used
    • B. A normal process during the break-in period of new brake pads
    • C. A loss of braking power caused by excessive heat from overuse
    • D. Brakes that squeal when applied lightly

    Hint: This condition results from repeated heavy braking that generates excessive heat in the braking system.

    Explanation: Brake fade is a loss of braking power caused by excessive heat from overuse, particularly on long downhill grades. This is especially relevant on Hawaii's steep volcanic mountain roads.

  2. What is the effect of a high center of gravity on a commercial vehicle?

    • A. Better fuel efficiency
    • B. Improved braking performance
    • C. Increased risk of rollover
    • D. Reduced tire wear

    Hint: Loading cargo high in a vehicle makes it behave more like a top-heavy object during turns.

    Explanation: A high center of gravity increases the risk of rollover, especially when turning, taking curves, or driving on uneven terrain. This is particularly dangerous on Hawaii's winding mountain roads with sharp curves.

  3. The longer the combination vehicle, the more the trailer will off-track. What should a driver do when making a right turn with a long trailer?

    • A. Speed up through the turn to reduce off-tracking
    • B. Turn the steering wheel quickly to complete the turn faster
    • C. Turn from the far right lane to minimize the turning arc
    • D. Swing wide to the left before turning right

    Hint: Longer vehicles have more severe off-tracking, requiring a specific turning technique.

    Explanation: With longer combination vehicles, drivers should swing wide or use a jug handle turn, moving slightly to the left before turning right to give the trailer wheels room to clear the curb and any objects on the inside of the turn.

  4. When inspecting tires during a pre-trip inspection, which condition would require the tire to be replaced before driving?

    • A. A minor scuff mark on the sidewall
    • B. Tread depth of less than 2/32 of an inch on a steer tire
    • C. A tread depth of 5/32 of an inch on a drive tire
    • D. Slightly uneven tread wear across the tire

    Hint: Steer tires have stricter tread depth requirements than drive or trailer tires because they control the vehicle's direction.

    Explanation: Front (steer) tires must have at least 4/32 of an inch tread depth and all other tires at least 2/32. A steer tire with less than 2/32 tread depth is well below the legal minimum and must be replaced immediately.

  5. When transporting hazardous materials, placards must be placed on which sides of the vehicle?

    • A. Front and back only
    • B. Only on the side facing oncoming traffic
    • C. All four sides: front, rear, and both sides
    • D. Only on the rear of the vehicle

    Hint: Placards must be visible from all directions to warn emergency responders approaching from any angle.

    Explanation: Hazmat placards must be displayed on all four sides of the vehicle, front, rear, and both sides, so that they are visible from any direction. Each placard must be at least 10 3/4 inches square.

  6. Where must hazardous materials shipping papers be kept while driving?

    • A. In the glove compartment
    • B. In the trailer with the cargo
    • C. In a pouch on the driver's door
    • D. In a locked box mounted behind the cab

    Hint: Shipping papers for hazmat must be immediately accessible to the driver and to emergency responders.

    Explanation: Shipping papers for hazardous materials must be kept in a pouch on the driver's door or in clear view and within the driver's reach while the seat belt is fastened. This allows quick access in an emergency.

  7. If a hazardous material is leaking from your vehicle, what should you do first?

    • A. Continue driving to the nearest truck stop for help
    • B. Park the vehicle, secure the area, and keep people away
    • C. Try to identify and repair the leak
    • D. Call your dispatcher and wait for instructions

    Hint: A hazmat leak requires immediate containment actions focused on safety rather than cleanup.

    Explanation: If a hazmat leak is discovered, the driver should immediately park the vehicle away from populated areas, secure the scene, keep people away from the leak, and contact emergency services.

  8. When should a bus driver evacuate passengers?

    • A. When there is a fire or the bus cannot be safely moved
    • B. Whenever the bus breaks down
    • C. Only when instructed by emergency services
    • D. Only when the destination has been reached and the door cannot open

    Hint: Bus evacuation is a last resort that should only be initiated when remaining on the bus is more dangerous.

    Explanation: Passengers should be evacuated if there is a fire or danger of fire, or if the bus is in a position that makes staying inside dangerous and the bus cannot be safely moved.

  9. When backing a commercial vehicle, you should:

    • A. Use a spotter, or get out and check behind the vehicle
    • B. Use your mirrors only and avoid getting out of the cab
    • C. Back as quickly as possible to clear the area
    • D. Only back up in daylight hours

    Hint: The limited rear visibility of commercial vehicles makes backing one of the most dangerous maneuvers.

    Explanation: When backing, always use a spotter if one is available. If not, get out and walk around the vehicle to check for obstacles behind you. Backing accidents are among the most common CMV incidents.

  10. When stopping at a railroad crossing in a CMV that is required to stop, the driver must stop between what distances from the nearest rail?

    • A. 5 to 25 feet
    • B. 10 to 30 feet
    • C. 15 to 50 feet
    • D. 25 to 75 feet

    Hint: The stopping distance at railroad crossings has specific minimum and maximum limits.

    Explanation: Commercial vehicles required to stop at railroad crossings must stop no closer than 15 feet and no farther than 50 feet from the nearest rail. The driver must then look and listen for approaching trains before proceeding.

This pool has 112 questions, and 42 are written for Hawaii. They put island conditions into the question: how trade winds push high-profile vehicles, why the first minutes of a tropical rain shower are the slickest, and what to do when you meet oncoming traffic on a narrow two-lane road with little shoulder. Others cover container work at the ports, where you verify twist locks and match seal numbers, and lava road closures near active volcanic areas on the Big Island.

Hawaii's OVUII law also appears: a conviction in your personal vehicle still disqualifies your CDL for at least a year. Another question asks why weight limits matter on island roads and bridges.

The study cards split the pool into 77 safe driving and cargo questions and 35 rules and licensing questions, with 10 free in each. One trap: some practice material lists 18 as the CDL age, but the HDOT manual says you must be 21 to hold a Hawaii CDL.

Key Topics

  • Trade winds, tropical rain and narrow two-lane roads
  • Port container work and the OVUII law
  • CDL classes and endorsements
  • Hours of service and fatigue
  • Cargo securement and weight
  • Placards and shipping papers