Skip to content

Utah CDL study: Pre-Trip Inspection questions

All 51 Utah pre-trip questions are in one deck, and 10 are free. Read them in the order you will walk your vehicle, naming each part and condition aloud. Then test yourself on pre-trip run 1.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 51 questions are free. The rest are in Pro.

During a CDL pre-trip inspection in Utah, which of the following must be checked on the engine compartment?

Free Pre-Trip Inspection questions questions for the Utah CDL test

Plain-text version of this question set

  1. During a CDL pre-trip inspection in Utah, which of the following must be checked on the engine compartment?

    • A. Only the oil level
    • B. Oil, coolant, power steering fluid, and belts/hoses
    • C. Only items visible without opening the hood
    • D. The engine compartment is not part of the CDL pre-trip

    Hint: A thorough engine compartment check involves multiple fluid levels and the condition of belts and hoses.

    Explanation: A thorough pre-trip inspection of the engine compartment includes checking oil level, coolant level, power steering fluid, water pump, alternator belt condition, and looking for leaks or worn hoses.

  2. How many red reflective triangles must be carried in a commercial vehicle in Utah?

    • A. 1
    • B. 2
    • C. 3
    • D. 4

    Hint: The number of triangles matches the number of placement positions recommended for roadside emergencies.

    Explanation: Federal regulations require all commercial vehicles to carry at least 3 red reflective triangles for use as emergency warning devices when stopped on the roadside.

  3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?

    • A. 60 seconds
    • B. 30 seconds
    • C. 90 seconds
    • D. 45 seconds

    Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.

    Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.

  4. Which step of the FMCSA seven-step inspection is the parking brake and service brake test?

    • A. Step 2 - Engine compartment
    • B. Step 7 - Start the engine and check the brake system
    • C. Step 3 - Start engine and inspect inside the cab
    • D. Step 5 - Walk-around inspection

    Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out.

    Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab.

  5. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?

    • A. Mirrors must be tinted to reduce sun glare
    • B. Only the driver-side mirror must be checked
    • C. Windshields may have any size crack as long as it is not in the driver's line of sight
    • D. Mirrors and glass must be clean, adjusted, and undamaged

    Hint: If you cannot see clearly out of it, it is a defect.

    Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.

  6. What is the minimum legal tread depth for STEERING (front) axle tires on a commercial motor vehicle?

    • A. 4/32 inch
    • B. 2/32 inch
    • C. 6/32 inch
    • D. 8/32 inch

    Hint: Steering tires need DOUBLE the tread of other tires because they handle directional control.

    Explanation: Steering-axle tires must have at least 4/32 inch of tread in every major groove.

  7. While checking the wheels and rims, which of the following indicates a defect?

    • A. Cracked rims, missing or loose lug nuts, or rust trails
    • B. Lug nuts that are clean and tightened to the specified torque
    • C. A rim with a uniform painted finish
    • D. Wheel hubs that show no signs of oil leakage

    Hint: Rust streaks from lug nuts are a classic warning sign on the skills test.

    Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention.

  8. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is:

    • A. 2 psi per minute
    • B. 4 psi per minute
    • C. 3 psi per minute
    • D. 6 psi per minute

    Hint: Combinations have more hoses, so they are allowed slightly more leakage.

    Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute.

  9. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?

    • A. Service = red, Emergency = blue
    • B. Service = blue, Emergency = red
    • C. Service = green, Emergency = yellow
    • D. Service = yellow, Emergency = green

    Hint: Emergency is the color of an emergency light.

    Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.

  10. What is required on the rear, sides, and front of most trailers for visibility?

    • A. Decorative paint and chrome trim
    • B. Only a single red reflector mounted in the center of the rear bumper
    • C. Reflective tape or reflectors plus working marker and clearance lights
    • D. Mud flaps only

    Hint: Reflective tape plus required lighting.

    Explanation: Trailers 80 inches or wider must have red-and-white conspicuity tape and marker/clearance/identification lights so they are visible at night and from the sides.

Nearly all of this pool's 51 questions cover the inspection itself: engine compartment, cab, lights, air brakes, coupling and the walk-around. Four are written for Utah. They ask the most pressure a combination may lose per minute with the engine off and brakes applied, what to check in the engine compartment (oil, coolant, power steering fluid, belts and hoses), the minimum tread for front tires and how many reflective triangles you must carry.

Say each item out loud as you check it. The examiner can only score what you name, and naming the part plus the condition (not cracked, not leaking, properly mounted) is the habit to build.

Because you supply the vehicle at DLD, practice on that exact truck or bus. Know where its fluid checks are, how its air system behaves on the leak test and where the triangles are stowed before test day.

Key Topics

  • Utah skills test fees and your own vehicle
  • Engine compartment checks
  • Air brake leak test
  • Front tire tread and wheels
  • Emergency equipment