Skip to content

Indiana CDL study: Pre-Trip Inspection questions

This deck has 50 Indiana pre-trip questions, 10 free, including 3 Indiana items on tires, coupling and brake drums. Work through it in walk-around order, front to back. Then try pre-trip run 1.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 50 questions are free. The rest are in Pro.

What is the minimum tread depth for front tires on a commercial vehicle?

Free Pre-Trip Inspection questions questions for the Indiana CDL test

Plain-text version of this question set

  1. What is the minimum tread depth for front tires on a commercial vehicle?

    • A. 2/32 inch
    • B. 4/32 inch
    • C. 6/32 inch
    • D. 8/32 inch

    Hint: Front tires have a stricter tread requirement than other tires because they provide steering control.

    Explanation: Front tires on a commercial vehicle must have a minimum tread depth of 4/32 inch. Other tires must have at least 2/32 inch.

  2. What should you check when inspecting brake drums or discs during a pre-trip inspection?

    • A. Only the color of the brake drums
    • B. Cracks, dents, or holes, and disc thickness
    • C. Only that the wheels spin freely
    • D. Only the brake pedal feel inside the cab

    Hint: The inspection focuses on physical damage to the drums and adequate material on the friction surfaces.

    Explanation: During a brake inspection, check brake drums for cracks, dents, or holes, and check discs for adequate thickness. Also check brake linings for proper thickness and look for signs of oil or grease contamination.

  3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?

    • A. 60 seconds
    • B. 30 seconds
    • C. 90 seconds
    • D. 45 seconds

    Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.

    Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.

  4. Which step of the FMCSA seven-step inspection is the parking brake and service brake test?

    • A. Step 2 - Engine compartment
    • B. Step 7 - Start the engine and check the brake system
    • C. Step 3 - Start engine and inspect inside the cab
    • D. Step 5 - Walk-around inspection

    Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out.

    Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab.

  5. Per FMCSA, how often must a CDL driver inspect their commercial vehicle?

    • A. Once per week
    • B. Before every trip and after every trip
    • C. Only at the start of each day
    • D. Only when the vehicle has been flagged for a defect

    Hint: Inspection is not a one-time event; safety checks bracket every shift and continue while driving.

    Explanation: Federal regulations require a pre-trip inspection before driving, en-route monitoring, and a post-trip inspection with a written DVIR at the end of each day.

  6. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?

    • A. Mirrors must be tinted to reduce sun glare
    • B. Only the driver-side mirror must be checked
    • C. Windshields may have any size crack as long as it is not in the driver's line of sight
    • D. Mirrors and glass must be clean, adjusted, and undamaged

    Hint: If you cannot see clearly out of it, it is a defect.

    Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.

  7. What is the minimum legal tread depth for STEERING (front) axle tires on a commercial motor vehicle?

    • A. 4/32 inch
    • B. 2/32 inch
    • C. 6/32 inch
    • D. 8/32 inch

    Hint: Steering tires need DOUBLE the tread of other tires because they handle directional control.

    Explanation: Steering-axle tires must have at least 4/32 inch of tread in every major groove.

  8. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is:

    • A. 2 psi per minute
    • B. 4 psi per minute
    • C. 3 psi per minute
    • D. 6 psi per minute

    Hint: Combinations have more hoses, so they are allowed slightly more leakage.

    Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute.

  9. What component on a tractor-trailer fifth-wheel coupling locks around the kingpin?

    • A. The locking jaws
    • B. The release handle for the lock
    • C. The trailer skid plate
    • D. The frame mounting bracket

    Hint: Their name describes what they do.

    Explanation: The locking jaws inside the fifth wheel close around the kingpin to secure the trailer. After coupling, you must visually confirm the jaws are fully closed around the kingpin.

  10. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?

    • A. Service = red, Emergency = blue
    • B. Service = blue, Emergency = red
    • C. Service = green, Emergency = yellow
    • D. Service = yellow, Emergency = green

    Hint: Emergency is the color of an emergency light.

    Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.

This pool has 50 questions, nearly all on the walk-around, with 3 written for Indiana. One covers front tire tread depth. Another asks what to check on a combination's coupling system: no gap, a locked kingpin and an engaged safety latch. A third asks what to look for on brake drums or discs: cracks, dents, holes and disc thickness.

The Indiana General Knowledge pool adds two more: what to check in the engine compartment (fluids, leaks, hoses, belts and wiring) and when lights and reflectors are checked, during the in-cab inspection and the walk-around. It also names the three parts of Indiana's skills test: pre-trip, basic controls and road.

On test day, name each part, say what you are checking for and point to it. After you pass all three parts, go back to a BMV branch to finish your CDL before the permit expires. The third-party test site list shows sites by area.

Key Topics

  • Indiana third-party sites and fee caps
  • Coupling system checks
  • Brake drums, discs and tires
  • Engine compartment items
  • Lights and reflectors