Skip to content

Illinois CDL study: Pre-Trip Inspection questions

This deck has 50 Illinois pre-trip questions, 10 free, with 2 Illinois items on tire tread and pushrod travel. Go through it in walk-around order, front to back. Then try pre-trip run 1.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 50 questions are free. The rest are in Pro.

During a pre-trip inspection, a tire should be rejected if the tread depth on a front steering tire is less than:

Free Pre-Trip Inspection questions questions for the Illinois CDL test

Plain-text version of this question set

  1. During a pre-trip inspection, a tire should be rejected if the tread depth on a front steering tire is less than:

    • A. 4/32 inch
    • B. 1/32 inch
    • C. 2/32 inch
    • D. 6/32 inch

    Hint: Front steering tires have a higher minimum tread requirement than other tires because steering control depends on them.

    Explanation: Front steering tires must have a tread depth of at least 4/32 inch. Other tires must have at least 2/32 inch. Tires with less tread are unsafe and illegal.

  2. When checking slack adjusters during a pre-trip inspection, brake pushrod travel should generally not exceed:

    • A. 1/2 inch
    • B. 2 inches
    • C. 3 inches
    • D. 1 inch

    Hint: Excessive pushrod travel is a key indicator that brakes are out of adjustment and losing effectiveness.

    Explanation: Brake pushrod travel generally should not exceed about 1 inch when the brakes are applied. Excessive travel indicates the brakes need adjustment.

  3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?

    • A. 60 seconds
    • B. 30 seconds
    • C. 90 seconds
    • D. 45 seconds

    Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.

    Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.

  4. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?

    • A. Mirrors must be tinted to reduce sun glare
    • B. Only the driver-side mirror must be checked
    • C. Windshields may have any size crack as long as it is not in the driver's line of sight
    • D. Mirrors and glass must be clean, adjusted, and undamaged

    Hint: If you cannot see clearly out of it, it is a defect.

    Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.

  5. While checking the wheels and rims, which of the following indicates a defect?

    • A. Cracked rims, missing or loose lug nuts, or rust trails
    • B. Lug nuts that are clean and tightened to the specified torque
    • C. A rim with a uniform painted finish
    • D. Wheel hubs that show no signs of oil leakage

    Hint: Rust streaks from lug nuts are a classic warning sign on the skills test.

    Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention.

  6. At what approximate air pressure do the spring brakes (parking brakes) come on automatically?

    • A. Between 60 and 80 psi
    • B. Between 85 and 100 psi
    • C. Between 20 and 45 psi
    • D. Between 100 and 125 psi

    Hint: This is well below the warning level - by the time the spring brakes apply, you have already been warned.

    Explanation: If service-air pressure drops to roughly 20-45 psi, the spring brakes apply automatically. This is why the low-air warning must trigger before 60 psi - to give the driver time to stop safely.

  7. What component on a tractor-trailer fifth-wheel coupling locks around the kingpin?

    • A. The locking jaws
    • B. The release handle for the lock
    • C. The trailer skid plate
    • D. The frame mounting bracket

    Hint: Their name describes what they do.

    Explanation: The locking jaws inside the fifth wheel close around the kingpin to secure the trailer. After coupling, you must visually confirm the jaws are fully closed around the kingpin.

  8. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?

    • A. Service = red, Emergency = blue
    • B. Service = blue, Emergency = red
    • C. Service = green, Emergency = yellow
    • D. Service = yellow, Emergency = green

    Hint: Emergency is the color of an emergency light.

    Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.

  9. What is the purpose of mud flaps (splash guards) on a tractor-trailer?

    • A. Decoration
    • B. To prevent water, mud, rocks, and debris from being thrown onto other vehicles
    • C. To improve fuel economy
    • D. To balance the trailer's weight evenly across both of the rear axle groups

    Hint: They keep the truck from throwing rocks and water at cars behind.

    Explanation: Mud flaps reduce spray and projectile debris from rear wheels. Most states require them; they must be properly mounted, not torn, not dragging on the ground, and the correct distance from the road surface.

  10. What is a Driver Vehicle Inspection Report (DVIR), and when must one be prepared?

    • A. A weekly summary of mileage and fuel use, prepared every Friday for the office
    • B. A document filed only when an accident occurs
    • C. A written report of vehicle condition and defects, done at each day's end
    • D. A fuel-purchase log; prepared at each fuel stop

    Hint: It is a daily written record of the vehicle's condition.

    Explanation: At the end of each driving day, you must write a DVIR for each vehicle you drove. It must list any defects that affect safe driving, or say that none were found.

This pool has 50 questions, almost all on the inspection itself, with 2 written for Illinois. One covers the minimum tread depth on a front steering tire, and the other how far a brake pushrod should travel when you check slack adjusters. Both are measurements examiners expect you to know.

The Illinois General Knowledge pool adds inspection items too: what to check in the engine compartment (oil, coolant, belts and leaks) and the colors of a trailer's reflectors, amber on the front and sides and red on the rear.

On the test, you name each part, say what you are checking for, such as leaks, cracks, wear or loose mounts, and point to or touch it. Cover the engine compartment, steering, suspension, brakes, wheels and tires, lights, and coupling devices on a combination, then the in-cab air brake check. Transferring an out-of-state CDL at 75 or older means taking these tests again.

Key Topics

  • Booking Illinois skills tests and the 14-day hold
  • Front tire tread depth
  • Slack adjuster pushrod travel
  • Engine compartment and reflectors
  • In-cab air brake check