Skip to content

Delaware CDL study: Safe driving, vehicle control and cargo

Two decks cover the 116 Delaware General Knowledge questions: 81 on safe driving and cargo, 35 on rules and licensing, 10 free in each. Read the bridge and toll plaza cards first, then test yourself on General Knowledge run 1.

1/10·0 done

What special consideration should CDL drivers be aware of when crossing the Delaware Memorial Bridge?

Free Safe driving, vehicle control and cargo questions for the Delaware CDL test

Plain-text version of this question set

  1. What special consideration should CDL drivers be aware of when crossing the Delaware Memorial Bridge?

    • A. Commercial vehicles are prohibited during morning rush hour traffic
    • B. CDL drivers must use the left lane at all times
    • C. The bridge has no weight restrictions
    • D. High winds can restrict or close lanes for high-profile vehicles

    Hint: This bridge is a major landmark connecting Delaware and New Jersey, and weather conditions can pose unique hazards.

    Explanation: The Delaware Memorial Bridge may restrict or close lanes for high-profile vehicles (such as empty trailers and tankers) during high wind conditions due to crosswind hazards.

  2. What causes brake fade in air brake systems?

    • A. Using brakes lightly over a long period
    • B. Cold weather reducing the air pressure
    • C. Excessive heat from prolonged or heavy braking
    • D. Driving at low speeds for extended periods

    Hint: Overusing brakes on a long downhill grade generates the heat that causes this dangerous condition.

    Explanation: Brake fade is caused by excessive heat from prolonged or heavy braking, such as riding the brakes on a long downgrade. The brakes become less effective as they overheat.

  3. The longer the combination vehicle, the more the trailer will off-track. What should a driver do when making a right turn with a long trailer?

    • A. Speed up through the turn to reduce off-tracking
    • B. Turn the steering wheel quickly to complete the turn faster
    • C. Turn from the far right lane to minimize the turning arc
    • D. Swing wide to the left before turning right

    Hint: Longer vehicles have more severe off-tracking, requiring a specific turning technique.

    Explanation: With longer combination vehicles, drivers should swing wide or use a jug handle turn, moving slightly to the left before turning right to give the trailer wheels room to clear the curb and any objects on the inside of the turn.

  4. When inspecting tires during a pre-trip inspection, which condition would require the tire to be replaced before driving?

    • A. A minor scuff mark on the sidewall
    • B. Tread depth of less than 2/32 of an inch on a steer tire
    • C. A tread depth of 5/32 of an inch on a drive tire
    • D. Slightly uneven tread wear across the tire

    Hint: Steer tires have stricter tread depth requirements than drive or trailer tires because they control the vehicle's direction.

    Explanation: Front (steer) tires must have at least 4/32 of an inch tread depth and all other tires at least 2/32. A steer tire with less than 2/32 tread depth is well below the legal minimum and must be replaced immediately.

  5. What is the purpose of a header board (headache rack) on a flatbed truck?

    • A. To provide a mounting point for clearance lights
    • B. To reduce wind resistance and improve fuel economy
    • C. To protect the cab from forward-shifting cargo
    • D. To support tarps covering the load

    Hint: The header board protects the cab from cargo that shifts forward during braking.

    Explanation: A header board (headache rack) is mounted behind the cab to protect the driver from cargo that shifts forward during hard braking or a collision. It acts as a barrier between the cargo and the cab.

  6. When transporting hazardous materials, placards must be placed on which sides of the vehicle?

    • A. Front and back only
    • B. Only on the side facing oncoming traffic
    • C. All four sides: front, rear, and both sides
    • D. Only on the rear of the vehicle

    Hint: Placards must be visible from all directions to warn emergency responders approaching from any angle.

    Explanation: Hazmat placards must be displayed on all four sides of the vehicle, front, rear, and both sides, so that they are visible from any direction. Each placard must be at least 10 3/4 inches square.

  7. Where must hazardous materials shipping papers be kept while driving?

    • A. In the glove compartment
    • B. In the trailer with the cargo
    • C. In a pouch on the driver's door
    • D. In a locked box mounted behind the cab

    Hint: Shipping papers for hazmat must be immediately accessible to the driver and to emergency responders.

    Explanation: Shipping papers for hazardous materials must be kept in a pouch on the driver's door or in clear view and within the driver's reach while the seat belt is fastened. This allows quick access in an emergency.

  8. What document should emergency responders consult to determine the dangers of a spilled hazardous material?

    • A. The vehicle registration
    • B. The driver's CDL
    • C. The bill of lading
    • D. The Emergency Response Guidebook (ERG)

    Hint: Emergency responders use a specific reference guide to identify hazmat dangers at an incident scene.

    Explanation: The Emergency Response Guidebook (ERG), published by the DOT, provides first responders with information on identifying hazardous materials and taking immediate protective actions during a hazmat incident.

  9. When should a bus driver evacuate passengers?

    • A. When there is a fire or the bus cannot be safely moved
    • B. Whenever the bus breaks down
    • C. Only when instructed by emergency services
    • D. Only when the destination has been reached and the door cannot open

    Hint: Bus evacuation is a last resort that should only be initiated when remaining on the bus is more dangerous.

    Explanation: Passengers should be evacuated if there is a fire or danger of fire, or if the bus is in a position that makes staying inside dangerous and the bus cannot be safely moved.

  10. What following distance should a CMV driver maintain at speeds under 40 mph?

    • A. At least 2 seconds for any vehicle
    • B. At least 1 second per 10 feet of length
    • C. At least 4 seconds regardless of vehicle length
    • D. At least 1 car length for every 10 mph of speed

    Hint: CMV following distance calculations are based on vehicle length rather than car-lengths.

    Explanation: At speeds under 40 mph, CMV drivers should maintain at least 1 second of following distance for every 10 feet of vehicle length. For speeds over 40 mph, add an additional second.

Delaware wrote 46 of these 116 questions for its own roads. One asks what to watch for on the Delaware Memorial Bridge, where high winds can restrict or close lanes for high-profile vehicles. Another covers approaching interstate toll plazas in a truck: move to the designated truck lane and slow down. Others ask about hazmat routing around Wilmington, the interstate corridor between Philadelphia and Baltimore, merging from on-ramps with a full load, and a driver's first steps after a crash.

The rest tracks the federal manual: CDL classes, securement, disqualifications, hours of service and placards. A frequent trap is the disqualification ladder, such as what a second serious violation within three years costs you. Another is age: Delaware licenses intrastate drivers at 18 with a year of experience, but interstate needs 21. The study cards split the pool into 81 safe driving and cargo questions and 35 rules and licensing questions, 10 free in each.

Key Topics

  • Delaware Memorial Bridge winds and toll plazas
  • Wilmington hazmat routing
  • Disqualifications and serious violations
  • Intrastate at 18, interstate at 21
  • Cargo securement and weight distribution