Skip to content

Colorado CDL study: Pre-Trip Inspection questions

The deck covers all 50 Colorado pre-trip questions, 10 free. Read the four Colorado items first, then the engine and brake cards. Say each check out loud as you go, then try pre-trip run 1.

1/10·0 done

Question Map

Correct Wrong Unseen

10 of 50 questions are free. The rest are in Pro.

What is the minimum tread depth for front tires on a commercial vehicle?

Free Pre-Trip Inspection questions questions for the Colorado CDL test

Plain-text version of this question set

  1. What is the minimum tread depth for front tires on a commercial vehicle?

    • A. 4/32 inch
    • B. 2/32 inch
    • C. 6/32 inch
    • D. 8/32 inch

    Hint: Front tires have a stricter tread depth requirement because they are critical for steering.

    Explanation: Front tires on a commercial motor vehicle must have a tread depth of at least 4/32 of an inch. Other tires must have at least 2/32 of an inch.

  2. What should you look for when inspecting brake drums during a pre-trip inspection?

    • A. That they are painted the correct color
    • B. That they are warm to the touch
    • C. Cracks, dents, or oil on the drums
    • D. That the drum surface is shiny and smooth

    Hint: Contamination on brake components reduces friction and compromises stopping ability.

    Explanation: During a pre-trip brake inspection, check for cracked or broken drums, shoes with oil, grease, or brake fluid on them, and shoes that are dangerously thin or missing.

  3. During an air brake check on a dual air system, the air pressure should build from 85 to 100 psi within how long?

    • A. 60 seconds
    • B. 30 seconds
    • C. 90 seconds
    • D. 45 seconds

    Hint: During an air brake check, there is a specific time limit for the air pressure to build from 85 to 100 psi.

    Explanation: Air pressure in a dual air system should build from 85 to 100 psi within 45 seconds. If it takes longer, the air compressor or the system may have a problem.

  4. Which step of the FMCSA seven-step inspection is the parking brake and service brake test?

    • A. Step 2 - Engine compartment
    • B. Step 7 - Start the engine and check the brake system
    • C. Step 3 - Start engine and inspect inside the cab
    • D. Step 5 - Walk-around inspection

    Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out.

    Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab.

  5. Per FMCSA, how often must a CDL driver inspect their commercial vehicle?

    • A. Once per week
    • B. Before every trip and after every trip
    • C. Only at the start of each day
    • D. Only when the vehicle has been flagged for a defect

    Hint: Inspection is not a one-time event; safety checks bracket every shift and continue while driving.

    Explanation: Federal regulations require a pre-trip inspection before driving, en-route monitoring, and a post-trip inspection with a written DVIR at the end of each day.

  6. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement?

    • A. Mirrors must be tinted to reduce sun glare
    • B. Only the driver-side mirror must be checked
    • C. Windshields may have any size crack as long as it is not in the driver's line of sight
    • D. Mirrors and glass must be clean, adjusted, and undamaged

    Hint: If you cannot see clearly out of it, it is a defect.

    Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view.

  7. While checking the wheels and rims, which of the following indicates a defect?

    • A. Cracked rims, missing or loose lug nuts, or rust trails
    • B. Lug nuts that are clean and tightened to the specified torque
    • C. A rim with a uniform painted finish
    • D. Wheel hubs that show no signs of oil leakage

    Hint: Rust streaks from lug nuts are a classic warning sign on the skills test.

    Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention.

  8. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is:

    • A. 2 psi per minute
    • B. 4 psi per minute
    • C. 3 psi per minute
    • D. 6 psi per minute

    Hint: Combinations have more hoses, so they are allowed slightly more leakage.

    Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute.

  9. What component on a tractor-trailer fifth-wheel coupling locks around the kingpin?

    • A. The locking jaws
    • B. The release handle for the lock
    • C. The trailer skid plate
    • D. The frame mounting bracket

    Hint: Their name describes what they do.

    Explanation: The locking jaws inside the fifth wheel close around the kingpin to secure the trailer. After coupling, you must visually confirm the jaws are fully closed around the kingpin.

  10. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line?

    • A. Service = red, Emergency = blue
    • B. Service = blue, Emergency = red
    • C. Service = green, Emergency = yellow
    • D. Service = yellow, Emergency = green

    Hint: Emergency is the color of an emergency light.

    Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly.

Four questions in this pool are written for Colorado. They cover tread depth on front tires, what to look for on brake drums, how much free play the steering wheel may have, and what happens when a roadside inspection finds critical violations: the vehicle can be placed out of service until repairs are made.

The rest are general inspection items, nearly all of them on the pre-trip itself. Practice the order you will use in front of the tester: engine compartment, cab and start-up checks, then a walk around the vehicle front to back, then the brake checks. For every part, say what you are checking for: mounted, secure, not cracked, not leaking.

The retest rule changes how you should prepare. Because a fail anywhere sends you back for all three portions, rehearse the pre-trip until it is routine, so your attention is free for basic control and the road test.

Key Topics

  • Colorado skills test: third-party testers and retests
  • Tires, brake drums and steering play
  • Out-of-service violations
  • Engine compartment and cab checks
  • Walkaround order and what to say