Alabama CDL study: Tanker questions
Every one of the 39 Alabama tanker questions is in this deck, and 10 are free. Study smooth bore tanks and rollover first, since they carry the most questions, then outage and compartments. Test yourself with tanker run 1.
Free Tanker questions questions for the Alabama CDL test
Plain-text version of this question set
Baffled liquid tanks have bulkheads with holes that let liquid flow through. What type of surge do baffles control most effectively?
- A. Side-to-side liquid surge
- B. Vertical liquid bouncing
- C. Roll-over forces in a curve
- D. Front-to-back surge
Hint: Baffles are bulkheads oriented across the tank, so they slow movement along the long axis of the tank.
Explanation: Baffles in liquid tanks help control front-to-back surge but do little to reduce side-to-side surge, which remains a serious rollover hazard on curves and turns.
Why are smooth-bore tanks (without baffles) commonly used for food-grade liquids such as milk?
- A. Sanitation regulations make baffled interiors hard to clean
- B. Smooth-bore tanks are lighter and cheaper to manufacture
- C. Food-grade liquids do not surge
- D. Federal law prohibits baffles in food tanks
Hint: The reason has to do with what could grow in the corners and crevices if baffles were present.
Explanation: Sanitation regulations require food-grade tanks to be smooth inside because baffles would create areas that are difficult to clean and could harbor bacteria.
Compartmented tanks have separate sections divided by permanent walls. What unique loading consideration do they require?
- A. All compartments must be filled to the same level
- B. Weight in each compartment must be balanced across the axles
- C. Only the rear compartment may be loaded on highways
- D. Compartments must always be loaded with only one and the same product
Hint: Even though the compartments are separate, the truck has one set of axles underneath.
Explanation: When loading and unloading compartmented tanks, drivers must pay attention to how the weight is distributed so that no individual axle is overloaded.
Why should drivers never completely fill a liquid tank?
- A. The tank's pumps will not function properly with a full load
- B. Liquids expand with temperature; a full tank can rupture or leak
- C. Federal law caps any tank load at 90% capacity
- D. A completely full tank is too heavy for any tractor
Hint: It's about physics - what happens to liquids when they get warmer?
Explanation: Liquids expand as they warm. Drivers must leave outage so the load has room to expand without rupturing the tank or forcing liquid out the vents.
Even when carrying empty portable tanks, a CDL driver still needs the N (Tank) endorsement if:
- A. The portable tanks have any visible residue
- B. The portable tanks exceed 119 gallons each or 1,000 in aggregate
- C. Only when the tanks are full of product
- D. Never; the endorsement is only required when actively transporting liquid
Hint: The endorsement is triggered by the configuration and capacity, not whether the load is currently inside.
Explanation: The N endorsement applies to vehicles transporting liquid or gaseous materials in permanent or temporary tanks meeting the capacity thresholds, regardless of whether the tanks are full at that moment.
Which endorsement is required to haul hazardous materials in a cargo tank meeting tank-vehicle capacity thresholds?
- A. The N endorsement on its own
- B. H endorsement only
- C. X endorsement (combined N + H)
- D. P endorsement
Hint: Combining two endorsements gives you a single letter designation.
Explanation: Drivers who transport hazardous materials in cargo tanks need both the Tank (N) and HazMat (H) endorsements, which are combined into the X endorsement.
When making an emergency stop in a tanker, controlled or stab braking is preferred over emergency or panic braking because:
- A. It locks the wheels faster
- B. It uses the trailer brakes only
- C. It engages the engine retarder
- D. It keeps the wheels from locking up
Hint: You want to keep rolling, steerable wheels - not locked, skidding ones.
Explanation: Controlled or stab braking keeps the wheels from locking, which is critical for a tank vehicle because a locked wheel combined with surging liquid can cause loss of control or jackknife.
A partially loaded liquid tank is dangerous primarily because:
- A. There is room for the liquid to surge
- B. The fuel mileage drops sharply at highway speed
- C. The tank vents will leak vapor when parked
- D. It is illegal to carry a partial load on the highway
Hint: If the tank isn't full, the liquid has somewhere to slosh.
Explanation: A partially filled tank has free space, so the liquid can build up momentum and surge front-to-back or side-to-side, affecting handling and braking.
During a tank vehicle pre-trip inspection, drivers should pay special attention to:
- A. Only the tractor's brake system
- B. The tank shell, covers, vents, valves, and tie-downs
- C. Only the tires of the trailer
- D. The radio and the dispatch communication equipment
Hint: Think about anything unique to a tank vs. a flatbed or box trailer.
Explanation: Tank vehicle inspections must include the tank shell for damage and leaks, intact manhole covers and proper venting, secure valves and discharge equipment, and the tank's mounting and tie-downs.
Which combination of factors makes tank vehicles especially prone to rollover?
- A. Low weight and low center of gravity
- B. High center of gravity, liquid surge, and excessive speed
- C. Long wheelbase and air suspension
- D. Cold temperatures combined with completely full fuel tanks
Hint: Three classic ingredients: tall, sloshy, fast.
Explanation: The combination of a high center of gravity, side-to-side liquid surge, and excessive speed in curves and on ramps is the classic recipe for tanker rollover.
Our Alabama tanker pool holds 39 questions. Smooth bore tanks and rollover lead with 5 each, hazmat cargo in tanks has 4, and compartmented tanks and outage have 3 each. Portable tanks and braking have 2 apiece, with single questions on baffles, partial loads, vents, pre-trip and the N endorsement itself.
The pattern to learn is surge. In a smooth bore tank there is nothing to slow the liquid, so braking and starting push the truck. Baffles cut front-to-back surge but not side-to-side movement, which is why rollover questions stress slow speeds on curves and ramps.
Outage questions ask why you never fill a tank completely: liquids expand as they warm. Compartmented loads add a weight-distribution question, so know how filling or emptying compartments shifts the axle weights.
Key Topics
- N and X endorsements on an Alabama CDL
- Surge in smooth bore and partly filled tanks
- Baffles and compartmented tanks
- Rollover risk on curves and ramps
- Outage and liquid expansion