# Washington CDL HazMat practice questions (free set) Our pool has 50 HazMat questions, 5 of them written for Washington. They ask what step beyond the written test the endorsement needs (a TSA security threat assessment), what shape a placard is, what to check before entering a Washington tunnel with a hazmat load, who you must notify besides emergency services after a spill near a Washington waterway (the National Response Center and the state Department of Ecology), and how outage works when loading a hazmat tanker. Interactive version with answers, hints and explanations: https://dmv-iq.com/washington-cdl-hazmat-test/study/all-questions/ ## About the Washington CDL HazMat knowledge test - Issuing agency: DOL - Passing score: 80% - Source: the Washington State Commercial Driver Guide ## Topics covered - Washington tunnels and spill reporting - 30 questions, 24 to pass - Retest at every renewal and transfer - TSA threat assessment and training record - Placards, shipping papers and classes ## The 10 free questions This set has 50 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. If a CDL driver hauling hazardous materials is involved in a spill near a Washington waterway, who must be notified in addition to 911? - A. The National Response Center and Ecology - B. Only the trucking company dispatcher - C. Only the local fire department chief - D. The Federal Highway Administration only Hint: A hazmat spill near water requires notifying both federal and state environmental agencies. Explanation: Hazmat spills require notification of the National Response Center (NRC) at 1-800-424-8802, and in Washington, the Department of Ecology must also be notified. This is especially critical near the state's many waterways. ### 2. When loading a hazmat tanker, what is the maximum outage (empty space) rule for most liquid loads? - A. Outage depends on the product's expansion rate - B. Tanks must be completely full - C. At least 1% outage must be maintained for liquid expansion - D. At least 5% outage is always required Hint: Different liquids expand at different rates when heated, so outage requirements cannot be one-size-fits-all. Explanation: Outage (ullage) requirements vary by product because different liquids expand at different rates when heated. Drivers must follow the specific loading procedures for each product to prevent dangerous pressure buildup. ### 3. Which hazardous materials class includes dynamite and TNT? - A. Class 1 - Explosives - B. Class 3 - Flammable Liquids - C. Class 5 - Oxidizers - D. Class 4 - Flammable Solids Hint: Class 1 encompasses all explosive materials and has multiple subdivisions based on blast risk. Explanation: Class 1 covers all explosives, which are divided into six divisions based on the type of hazard they present, from mass explosion hazards to very insensitive explosives. ### 4. Which of the following convictions can permanently disqualify a driver from holding a HazMat endorsement? - A. A single speeding ticket within the past year - B. Failing the air brake skills test once - C. A felony involving explosives or terrorism - D. Any traffic accident in a commercial vehicle Hint: Think of crimes that directly threaten national security. Explanation: TSA classifies certain felonies as 'permanently disqualifying' for the HazMat endorsement. These include offenses involving explosives, terrorism, espionage, treason, sedition, and certain crimes against transportation security. ### 5. Which of the following best describes the federal purpose of the hazardous materials regulations? - A. Contain it, communicate risk, ship safely - B. To reduce shipping costs for hazmat carriers - C. To require all hazmat to travel only by rail - D. To eliminate hazardous materials from commerce Hint: Three Cs: contain, communicate, control. Explanation: The intent of the hazardous materials regulations is to contain the product, communicate the risk, and ensure safe drivers and equipment. Containment, communication, and safe transportation are the three core goals. ### 6. Which hazard class number is assigned to Flammable Liquids such as gasoline? - A. Class 3 - B. Class 2 - C. Class 4 - D. Class 6 Hint: Gasoline tankers wear this red placard. Explanation: Class 3 covers Flammable and Combustible Liquids, including gasoline, diesel, and many solvents. Placards for Class 3 are red with a flame symbol. ### 7. Which placard color indicates a non-flammable, non-toxic gas (Division 2.2)? - A. Red - B. Yellow - C. Black and white - D. Green Hint: Think 'green light' = safest of the three gas divisions. Explanation: Division 2.2 (Non-Flammable Gas) placards are green with a white gas cylinder symbol. Examples include compressed nitrogen and helium. ### 8. Why must a cargo tank be bonded and grounded before loading or unloading a flammable liquid? - A. To stop the tank from rolling away - B. To increase the product's flow rate - C. To conduct static away and stop sparks - D. To keep the product from evaporating Hint: Static + flammable vapor = explosion. Explanation: Static electricity can build up during liquid transfer. Bonding the cargo tank to the receiving tank, and grounding the system, provides a path for static charge to safely flow away, preventing a spark that could ignite vapors. ### 9. What does the hazardous materials Segregation Table tell a driver? - A. Which materials cannot be loaded together - B. How fast a hazmat load may be driven - C. How long shipping papers must be retained - D. Which states require a hazmat permit Hint: It is about what may NOT travel together. Explanation: The Segregation Table specifies hazardous materials that may not be loaded, transported, or stored together. For example, certain oxidizers must be kept separate from organic peroxides, and corrosives must be separated from cyanides. ### 10. A vehicle is considered 'attended' for hazmat purposes when the driver is: - A. Sleeping in the sleeper berth with the engine off - B. Inside the restaurant of a truck stop - C. Anywhere within the same county - D. Awake and within 100 feet with a clear view Hint: Awake, alert, within 100 feet, clear line of sight. Explanation: A vehicle is attended when the driver is awake, not in the sleeper berth, and either in the vehicle or within 100 feet of it with an unobstructed view. ## More - [Washington CDL HazMat test](https://dmv-iq.com/washington-cdl-hazmat-test/) - [Washington CDL HazMat practice run 1](https://dmv-iq.com/washington-cdl-hazmat-test/test-1/) - [Washington CDL practice test](https://dmv-iq.com/washington-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.