# Washington CDL General Knowledge practice questions (free set) There are 108 questions in this pool, and 38 were written for Washington. The state ones lean into the terrain. You will see how to brake down a grade like Snoqualmie Pass, which gear to hold before descending Stevens Pass, which tires take chains on the mountain passes, how to use a gravel runaway truck ramp, and what to do when brakes fade in the Cascades with no ramp ahead. Interactive version with answers, hints and explanations: https://dmv-iq.com/washington-cdl-general-knowledge-test/study/rules-and-licensing/ ## About the Washington CDL General Knowledge knowledge test - Issuing agency: DOL - Passing score: 80% - Source: the Washington State Commercial Driver Guide ## Topics covered - Cascade passes, chains and runaway ramps - Canada border crossings and port traffic - Washington truck speed and left lane rules - Disqualifications and serious violations - Cargo securement, including logs ## The 10 free questions This set has 39 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. When tire chains are required on Washington mountain passes like Snoqualmie or Stevens Pass, which tires must have chains on a commercial vehicle? - A. Front steering tires only, never the drives - B. Rear drive tires only, on one axle - C. As specified by WSDOT for the vehicle - D. All tires on every axle without exception Hint: Chain requirements vary by vehicle type and axle configuration, so there is no single universal rule. Explanation: Washington DOT (WSDOT) specifies chain requirements by vehicle type during chain-up advisories. Requirements vary; CMV drivers must follow WSDOT chain law guidance for their specific vehicle configuration. ### 2. When operating a commercial vehicle in the Port of Seattle or Port of Tacoma area, what is a critical safety concern due to heavy container traffic? - A. Sharing roads with rail and heavy equipment - B. Reduced speed limits of 15 mph everywhere - C. Mandatory escort vehicles - D. No left turns are allowed Hint: Port areas combine multiple types of heavy industrial traffic in a confined space. Explanation: Ports of Seattle and Tacoma are major intermodal facilities where CMVs share roadways with rail operations, container chassis, and heavy equipment. Drivers must be vigilant for crossing rail tracks and maneuvering equipment. ### 3. A driver needs a Class C CDL to operate which of the following vehicles? - A. A straight truck weighing 30,000 lbs - B. A bus designed to carry 16 or more passengers, including the driver - C. A tractor-trailer with a GCWR of 40,000 lbs - D. A pickup truck towing a flatbed trailer totaling 15,000 lbs Hint: Class C covers vehicles that may not be exceptionally heavy but carry passengers or hazmat. Explanation: A Class C CDL is required for vehicles designed to transport 16 or more passengers (including the driver) or vehicles placarded for hazardous materials that do not meet Class A or B requirements. ### 4. What does the X endorsement on a CDL allow a driver to do? - A. Drive extra-long combination vehicles only - B. Haul hazardous materials in a tanker - C. Operate vehicles with air brakes - D. Pull triple trailers Hint: The X endorsement is a combination of two individual endorsements. Explanation: The X endorsement is a combination of the H (Hazardous Materials) and N (Tank Vehicle) endorsements, allowing a driver to haul hazardous materials in a tank vehicle. ### 5. At what gross vehicle weight rating (GVWR) is a CDL required for a single vehicle? - A. 26,001 lbs or more - B. 10,001 lbs or more - C. 18,001 lbs or more - D. 33,001 lbs or more Hint: There is a specific weight threshold that triggers the CDL requirement for a single vehicle. Explanation: A CDL is required for any single vehicle with a GVWR of 26,001 lbs or more. Vehicles below this threshold typically require a standard commercial or non-commercial license depending on the state. ### 6. After the end-of-day (post-trip) inspection, if the driver finds no defects, what must the driver do? - A. File a written report documenting that no defects were found - B. Nothing: a report is only required when defects are found - C. Record the inspection in their logbook but no written report is needed - D. Notify the motor carrier by phone that the vehicle is safe Hint: A report is only legally required when there are defects to document. Explanation: Federal rules require a written Driver Vehicle Inspection Report (DVIR) at the end of each day only when defects or problems are found. If the inspection finds no defects, no written report is required, although many carriers ask for a no-defect report as company policy. ### 7. What is the federal maximum gross vehicle weight for a commercial motor vehicle on interstate highways? - A. 100,000 lbs - B. 60,000 lbs - C. 80,000 lbs - D. 90,000 lbs Hint: There is a maximum total weight for commercial vehicles on interstate highways. Explanation: The federal maximum gross vehicle weight for commercial motor vehicles operating on interstate highways is 80,000 lbs. Some states may issue overweight permits for loads exceeding this limit. ### 8. Most CDL drivers are now required to use which device instead of paper logbooks to track their hours of service? - A. A GPS navigation system - B. A dashboard camera (dashcam) - C. A smartphone app approved by the driver's company - D. An Electronic Logging Device (ELD) Hint: Paper logbooks have been largely replaced by a mandatory electronic system for tracking driving hours. Explanation: The ELD mandate requires most commercial motor vehicle drivers to use Electronic Logging Devices to record their hours of service automatically. ELDs connect to the vehicle's engine to record driving time accurately. ### 9. What is the maximum blood alcohol concentration (BAC) at which a CDL holder can legally operate a commercial motor vehicle? - A. 0.02% - B. 0.08% - C. 0.06% - D. 0.04% Hint: CDL holders are held to a stricter blood alcohol standard than regular drivers. Explanation: CDL holders are subject to a BAC limit of 0.04% when operating a commercial motor vehicle, which is half the standard 0.08% limit for non-commercial drivers. ### 10. A second DUI conviction while operating a CMV results in what penalty? - A. A 3-year CDL disqualification - B. Lifetime CDL disqualification - C. A 5-year CDL disqualification - D. A 10-year CDL disqualification Hint: The penalty for a second DUI conviction in a CMV is designed to permanently remove unsafe drivers from commercial vehicles. Explanation: A second DUI offense while operating a CMV results in a lifetime CDL disqualification. Some states may allow reinstatement after 10 years with completion of a rehabilitation program. ## More - [Washington CDL General Knowledge test](https://dmv-iq.com/washington-cdl-general-knowledge-test/) - [Washington CDL General Knowledge practice run 1](https://dmv-iq.com/washington-cdl-general-knowledge-test/test-1/) - [Washington CDL practice test](https://dmv-iq.com/washington-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.