# New York CDL General Knowledge practice questions (free set) Our New York pool for this test has 117 questions, and 47 of them are New York items. Several deal with driving in and around the city: following designated NYC truck routes, the hazmat loads barred from city tunnels, the overheight, overweight and hazmat limits at the George Washington Bridge, the congestion pricing zone in Manhattan, and the TWIC card for the Port of New York and New Jersey. Others cover the Thruway's commercial rules and NYS DOT oversize permits. Interactive version with answers, hints and explanations: https://dmv-iq.com/new-york-cdl-general-knowledge-test/study/rules-and-licensing/ ## About the New York CDL General Knowledge knowledge test - Issuing agency: DMV - Passing score: 80% - Source: the New York State Commercial Driver's Manual (CDL-10) ## Topics covered - NYC truck routes, tunnels and the George Washington Bridge - DWI and DWAI disqualifications in New York - Thruway rules, oversize permits and port access - CDL classes, endorsements and age limits - Cargo securement and weight distribution - Railroad crossings and emergencies ## The 10 free questions This set has 43 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. In New York, what is the maximum Blood Alcohol Content (BAC) allowed for a CDL holder operating a commercial motor vehicle? - A. 0.02% - B. 0.04% - C. 0.06% - D. 0.08% Hint: The BAC limit for commercial vehicle operators is exactly half the standard limit for regular drivers. Explanation: CDL holders operating commercial vehicles are held to a stricter BAC limit of 0.04%, which is half the standard 0.08% limit for non-commercial drivers. ### 2. When testing the air leakage rate for a combination vehicle with the engine off and brakes applied, the air pressure should not drop more than how many psi per minute? - A. 2 psi - B. 3 psi - C. 4 psi - D. 5 psi Hint: Combination vehicles have a higher allowable leak rate than single vehicles because they have more connections. Explanation: For combination vehicles, the air leakage rate should not exceed 4 psi per minute with the engine off and brakes fully applied. For single vehicles, the limit is 3 psi per minute. ### 3. A driver needs a Class C CDL to operate which of the following vehicles? - A. A straight truck weighing 30,000 lbs - B. A bus designed to carry 16 or more passengers, including the driver - C. A tractor-trailer with a GCWR of 40,000 lbs - D. A pickup truck towing a flatbed trailer totaling 15,000 lbs Hint: Class C covers vehicles that may not be exceptionally heavy but carry passengers or hazmat. Explanation: A Class C CDL is required for vehicles designed to transport 16 or more passengers (including the driver) or vehicles placarded for hazardous materials that do not meet Class A or B requirements. ### 4. What does the X endorsement on a CDL allow a driver to do? - A. Drive extra-long combination vehicles only - B. Haul hazardous materials in a tanker - C. Operate vehicles with air brakes - D. Pull triple trailers Hint: The X endorsement is a combination of two individual endorsements. Explanation: The X endorsement is a combination of the H (Hazardous Materials) and N (Tank Vehicle) endorsements, allowing a driver to haul hazardous materials in a tank vehicle. ### 5. At what gross vehicle weight rating (GVWR) is a CDL required for a single vehicle? - A. 26,001 lbs or more - B. 10,001 lbs or more - C. 18,001 lbs or more - D. 33,001 lbs or more Hint: There is a specific weight threshold that triggers the CDL requirement for a single vehicle. Explanation: A CDL is required for any single vehicle with a GVWR of 26,001 lbs or more. Vehicles below this threshold typically require a standard commercial or non-commercial license depending on the state. ### 6. If the previous driver's DVIR lists a defect that has been certified as repaired, what must the current driver do? - A. Refuse to drive until a mechanic re-inspects the vehicle - B. File a new report with the FMCSA - C. Review the report, confirm repairs, and sign the DVIR - D. Call the previous driver to verify the repair was made Hint: When the previous driver reported a defect, the current driver must verify the repair before driving. Explanation: The current driver must review the previous DVIR, confirm that any listed defects have been repaired or are noted as not needing repair, sign the report acknowledging they reviewed it, and conduct their own pre-trip inspection. ### 7. What is the federal maximum gross vehicle weight for a commercial motor vehicle on interstate highways? - A. 100,000 lbs - B. 60,000 lbs - C. 80,000 lbs - D. 90,000 lbs Hint: There is a maximum total weight for commercial vehicles on interstate highways. Explanation: The federal maximum gross vehicle weight for commercial motor vehicles operating on interstate highways is 80,000 lbs. Some states may issue overweight permits for loads exceeding this limit. ### 8. Most CDL drivers are now required to use which device instead of paper logbooks to track their hours of service? - A. A GPS navigation system - B. A dashboard camera (dashcam) - C. A smartphone app approved by the driver's company - D. An Electronic Logging Device (ELD) Hint: Paper logbooks have been largely replaced by a mandatory electronic system for tracking driving hours. Explanation: The ELD mandate requires most commercial motor vehicle drivers to use Electronic Logging Devices to record their hours of service automatically. ELDs connect to the vehicle's engine to record driving time accurately. ### 9. Under the 60/70-hour rule, a property-carrying CMV driver who has worked 70 hours in 8 consecutive days may not drive again until: - A. They have taken at least 10 consecutive hours off duty - B. Enough hours fall off, or they take a 34-hour restart - C. They have taken a 30-minute break - D. They obtain a waiver from their employer Hint: The 60/70-hour rule limits total on-duty time over a rolling period, but there is a way to reset the clock. Explanation: Once a driver reaches 70 hours of on-duty time in 8 days, they cannot drive until hours fall off the rolling 8-day period, or they take a valid 34-hour restart to reset the clock. ### 10. A CDL holder convicted of a DUI while driving a CMV for the first time will be disqualified for how long? - A. 6 months - B. 3 years - C. 1 year - D. Life Hint: A first DUI conviction while driving a CMV results in a significant mandatory disqualification period. Explanation: A first DUI conviction while driving a commercial vehicle means a 1-year CDL disqualification under federal rules. If the driver was hauling hazardous materials that need placards, it is 3 years instead. 6 months is too short, and a lifetime ban applies only to a second major offense, not a first. ## More - [New York CDL General Knowledge test](https://dmv-iq.com/new-york-cdl-general-knowledge-test/) - [New York CDL General Knowledge practice run 1](https://dmv-iq.com/new-york-cdl-general-knowledge-test/test-1/) - [New York CDL practice test](https://dmv-iq.com/new-york-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.