# New Mexico CDL General Knowledge practice questions (free set) 46 of those 116 questions are written around New Mexico driving. Several deal with the mountains and the desert: how to brake down the I-25 grade at Raton Pass, why a high-profile truck needs extra care in the crosswinds along I-40 in the east, what to do when a dust storm hits on I-10 or I-25, and why coolant and engine power suffer at high altitude. Others cover open-range livestock on unfenced rural roads at night and black ice in the north. Interactive version with answers, hints and explanations: https://dmv-iq.com/new-mexico-cdl-general-knowledge-test/study/rules-and-licensing/ ## About the New Mexico CDL General Knowledge knowledge test - Issuing agency: MVD - Passing score: 80% - Source: the New Mexico Commercial Driver's License Manual ## Topics covered - Raton Pass grades, I-40 crosswinds and dust storms - WIPP shipments and border port documents - Open range, altitude and black ice - CDL classes, ages and the K restriction - Cargo securement and hazmat basics - Fatigue and hours of service ## The 10 free questions This set has 36 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. Which endorsement is specifically required for transporting nuclear waste through New Mexico to the WIPP facility near Carlsbad? - A. H - Hazardous Materials - B. T - Double/Triple Trailers - C. N - Tank Vehicle - D. X - Tank and Hazmat combined Hint: New Mexico is home to the nation's only deep geological nuclear waste repository, which requires specific hazmat transport credentials. Explanation: An H (Hazardous Materials) endorsement is required to transport any hazmat, including the transuranic nuclear waste shipped to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, NM. The X endorsement combines tank and hazmat but is not specifically required for WIPP shipments unless using tank vehicles. ### 2. What is the BAC (Blood Alcohol Concentration) limit for a CDL holder operating a commercial vehicle in New Mexico? - A. 0.02% - B. 0.04% - C. 0.06% - D. 0.08% Hint: The commercial BAC limit is exactly half the standard legal limit for non-commercial drivers. Explanation: The BAC limit for operating a commercial motor vehicle in New Mexico is 0.04%, which is half the limit for non-commercial drivers (0.08%). This applies regardless of the type of vehicle being driven at the time. ### 3. A driver needs a Class C CDL to operate which of the following vehicles? - A. A straight truck weighing 30,000 lbs - B. A bus designed to carry 16 or more passengers, including the driver - C. A tractor-trailer with a GCWR of 40,000 lbs - D. A pickup truck towing a flatbed trailer totaling 15,000 lbs Hint: Class C covers vehicles that may not be exceptionally heavy but carry passengers or hazmat. Explanation: A Class C CDL is required for vehicles designed to transport 16 or more passengers (including the driver) or vehicles placarded for hazardous materials that do not meet Class A or B requirements. ### 4. If you take the CDL skills test in a vehicle with an automatic transmission, what restriction will be placed on your CDL? - A. An 'E' restriction: automatic transmissions only - B. No restriction is placed - C. You must retake the test within 6 months - D. You will receive an 'L' restriction limiting you to non-air brake vehicles Hint: Testing in a vehicle with one type of transmission limits what you can legally drive. Explanation: Taking the CDL skills test in a vehicle with an automatic transmission results in an E restriction, which limits the driver to operating commercial vehicles with automatic transmissions only. ### 5. At what gross vehicle weight rating (GVWR) is a CDL required for a single vehicle? - A. 26,001 lbs or more - B. 10,001 lbs or more - C. 18,001 lbs or more - D. 33,001 lbs or more Hint: There is a specific weight threshold that triggers the CDL requirement for a single vehicle. Explanation: A CDL is required for any single vehicle with a GVWR of 26,001 lbs or more. Vehicles below this threshold typically require a standard commercial or non-commercial license depending on the state. ### 6. If the previous driver's DVIR lists a defect that has been certified as repaired, what must the current driver do? - A. Refuse to drive until a mechanic re-inspects the vehicle - B. File a new report with the FMCSA - C. Review the report, confirm repairs, and sign the DVIR - D. Call the previous driver to verify the repair was made Hint: When the previous driver reported a defect, the current driver must verify the repair before driving. Explanation: The current driver must review the previous DVIR, confirm that any listed defects have been repaired or are noted as not needing repair, sign the report acknowledging they reviewed it, and conduct their own pre-trip inspection. ### 7. What is the federal maximum gross vehicle weight for a commercial motor vehicle on interstate highways? - A. 100,000 lbs - B. 60,000 lbs - C. 80,000 lbs - D. 90,000 lbs Hint: There is a maximum total weight for commercial vehicles on interstate highways. Explanation: The federal maximum gross vehicle weight for commercial motor vehicles operating on interstate highways is 80,000 lbs. Some states may issue overweight permits for loads exceeding this limit. ### 8. Most CDL drivers are now required to use which device instead of paper logbooks to track their hours of service? - A. A GPS navigation system - B. A dashboard camera (dashcam) - C. A smartphone app approved by the driver's company - D. An Electronic Logging Device (ELD) Hint: Paper logbooks have been largely replaced by a mandatory electronic system for tracking driving hours. Explanation: The ELD mandate requires most commercial motor vehicle drivers to use Electronic Logging Devices to record their hours of service automatically. ELDs connect to the vehicle's engine to record driving time accurately. ### 9. Under the 60/70-hour rule, a property-carrying CMV driver who has worked 70 hours in 8 consecutive days may not drive again until: - A. They have taken at least 10 consecutive hours off duty - B. Enough hours fall off, or they take a 34-hour restart - C. They have taken a 30-minute break - D. They obtain a waiver from their employer Hint: The 60/70-hour rule limits total on-duty time over a rolling period, but there is a way to reset the clock. Explanation: Once a driver reaches 70 hours of on-duty time in 8 days, they cannot drive until hours fall off the rolling 8-day period, or they take a valid 34-hour restart to reset the clock. ### 10. A CDL holder is found to have a BAC of 0.05% while operating a commercial vehicle. What is the consequence? - A. A written warning only, with no penalty on a first offense - B. A fine only, with no impact on the CDL or the driving record - C. The driver must retake both the CDL knowledge test and the road skills test - D. The driver is placed out of service for 24 hours and faces CDL disqualification Hint: Exceeding the CDL BAC limit while operating a CMV triggers immediate consequences plus long-term penalties. Explanation: A CDL driver with a BAC of 0.04% or higher while operating a CMV is placed out of service for 24 hours and faces CDL disqualification: one year for a first offense, or three years if carrying hazmat. ## More - [New Mexico CDL General Knowledge test](https://dmv-iq.com/new-mexico-cdl-general-knowledge-test/) - [New Mexico CDL General Knowledge practice run 1](https://dmv-iq.com/new-mexico-cdl-general-knowledge-test/test-1/) - [New Mexico CDL practice test](https://dmv-iq.com/new-mexico-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.