# Mississippi CDL HazMat practice questions (free set) Three questions in this pool are written for Mississippi. One asks what you must pass for the endorsement: the written test and the TSA check. Another covers hazmat routes and port-area restrictions near the Port of Gulfport and along the coast. The third asks how close to a bridge, tunnel or building a vehicle loaded with the most dangerous explosives may park. Interactive version with answers, hints and explanations: https://dmv-iq.com/mississippi-cdl-hazmat-test/study/all-questions/ ## About the Mississippi CDL HazMat knowledge test - Issuing agency: DPS - Passing score: 80% - Source: the Mississippi Commercial Driver License Manual ## Topics covered - Mississippi H: written test plus TSA check - Port of Gulfport and coastal hazmat routes - Hazard classes and placards - Explosives parking rules - Shipping papers and spill response ## The 10 free questions This set has 50 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. When transporting hazardous materials near the Port of Gulfport or through Mississippi coastal areas, what must a CDL driver be aware of? - A. No special requirements apply to coastal routes - B. Designated hazmat routes and port-area restrictions - C. Hazmat loads are banned from all Mississippi coastal highways - D. Only Class A CDL holders can drive near the coast Hint: Port areas and coastal zones have special routing requirements due to population density and environmental concerns. Explanation: CDL drivers transporting hazardous materials near the Port of Gulfport and Mississippi coastal areas must follow designated hazmat routes and observe restrictions near port facilities, residential areas, and environmentally sensitive zones. ### 2. A CMV loaded with Division 1.1 explosives may NOT be parked within how many feet of a bridge, tunnel, or building? - A. 300 feet - B. 50 feet - C. 100 feet - D. 500 feet Hint: Division 1.1 explosives are the most dangerous category, requiring the greatest safety distances. Explanation: Vehicles carrying Division 1.1 explosives may not be parked within 300 feet of a bridge, tunnel, dwelling, or place where people gather. This is a critical safety requirement due to the extreme danger of these materials. ### 3. Which hazardous materials class covers corrosive materials such as battery acid? - A. Class 5 - Oxidizers - B. Class 6 - Poisons - C. Class 8 - Corrosives - D. Class 3 - Flammable Liquids Hint: Class 8 includes materials that can destroy living tissue and metals through chemical reaction. Explanation: Class 8 covers corrosive materials: substances that can destroy living tissue and corrode metal on contact. Examples include battery acid, sulfuric acid, and sodium hydroxide. ### 4. Which of the following convictions can permanently disqualify a driver from holding a HazMat endorsement? - A. A single speeding ticket within the past year - B. Failing the air brake skills test once - C. A felony involving explosives or terrorism - D. Any traffic accident in a commercial vehicle Hint: Think of crimes that directly threaten national security. Explanation: TSA classifies certain felonies as 'permanently disqualifying' for the HazMat endorsement. These include offenses involving explosives, terrorism, espionage, treason, sedition, and certain crimes against transportation security. ### 5. Which of the following best describes the federal purpose of the hazardous materials regulations? - A. Contain it, communicate risk, ship safely - B. To reduce shipping costs for hazmat carriers - C. To require all hazmat to travel only by rail - D. To eliminate hazardous materials from commerce Hint: Three Cs: contain, communicate, control. Explanation: The intent of the hazardous materials regulations is to contain the product, communicate the risk, and ensure safe drivers and equipment. Containment, communication, and safe transportation are the three core goals. ### 6. Which hazard class number is assigned to Flammable Liquids such as gasoline? - A. Class 3 - B. Class 2 - C. Class 4 - D. Class 6 Hint: Gasoline tankers wear this red placard. Explanation: Class 3 covers Flammable and Combustible Liquids, including gasoline, diesel, and many solvents. Placards for Class 3 are red with a flame symbol. ### 7. Which placard color indicates a non-flammable, non-toxic gas (Division 2.2)? - A. Red - B. Yellow - C. Black and white - D. Green Hint: Think 'green light' = safest of the three gas divisions. Explanation: Division 2.2 (Non-Flammable Gas) placards are green with a white gas cylinder symbol. Examples include compressed nitrogen and helium. ### 8. When the driver is OUT of the vehicle, where must the hazmat shipping papers be left? - A. Locked in the glove compartment - B. Folded inside the driver's wallet - C. On the seat or door pouch - D. Inside the trailer with the cargo Hint: Locking them up defeats the whole point. Explanation: When the driver is not at the controls, the shipping papers must be in the driver's door pouch or on the driver's seat. The intent is that emergency responders can quickly find them even if the driver is injured or missing. ### 9. Why must a cargo tank be bonded and grounded before loading or unloading a flammable liquid? - A. To stop the tank from rolling away - B. To increase the product's flow rate - C. To conduct static away and stop sparks - D. To keep the product from evaporating Hint: Static + flammable vapor = explosion. Explanation: Static electricity can build up during liquid transfer. Bonding the cargo tank to the receiving tank, and grounding the system, provides a path for static charge to safely flow away, preventing a spark that could ignite vapors. ### 10. What does the hazardous materials Segregation Table tell a driver? - A. Which materials cannot be loaded together - B. How fast a hazmat load may be driven - C. How long shipping papers must be retained - D. Which states require a hazmat permit Hint: It is about what may NOT travel together. Explanation: The Segregation Table specifies hazardous materials that may not be loaded, transported, or stored together. For example, certain oxidizers must be kept separate from organic peroxides, and corrosives must be separated from cyanides. ## More - [Mississippi CDL HazMat test](https://dmv-iq.com/mississippi-cdl-hazmat-test/) - [Mississippi CDL HazMat practice run 1](https://dmv-iq.com/mississippi-cdl-hazmat-test/test-1/) - [Mississippi CDL practice test](https://dmv-iq.com/mississippi-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.