# Colorado CDL General Knowledge practice questions (free set) This pool includes 36 questions written for Colorado conditions. Several deal with mountain grades: picking a low gear before the descent, testing brakes at the designated brake check areas on passes like I-70, and what runaway truck ramps are for. Another asks how thin air at high elevation saps diesel power, and one covers chain and traction rules on I-70 in the mountains. Under state law, from September 1 through May 31 CDOT may require commercial vehicles of 16,001 pounds or more to carry traction equipment on I-70 west of Morrison and on several other mountain highways. Interactive version with answers, hints and explanations: https://dmv-iq.com/colorado-cdl-general-knowledge-test/study/rules-and-licensing/ ## About the Colorado CDL General Knowledge knowledge test - Issuing agency: DMV - Passing score: 80% - Source: the Colorado Commercial Driver License Manual (DR 2251) ## Topics covered - Colorado mountain grades, brake checks and runaway ramps - Traction and chain rules on I-70 - K restriction for drivers 18 through 20 - CDL classes and hours of service - Cargo securement and disqualifications ## The 10 free questions This set has 36 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. Under federal Hours of Service rules, after how many cumulative hours of driving must a CMV driver take a 30-minute break? - A. 6 hours - B. 10 hours - C. 14 hours - D. 8 hours Hint: The break clock counts driving hours only, and they add up rather than having to run back to back. Explanation: A driver hauling property may not drive after 8 total hours of driving without first taking a break of at least 30 minutes in a row away from driving. Only driving time counts toward the 8 hours, and those hours do not have to be back to back. ### 2. A driver needs a Class C CDL to operate which of the following vehicles? - A. A straight truck weighing 30,000 lbs - B. A bus designed to carry 16 or more passengers, including the driver - C. A tractor-trailer with a GCWR of 40,000 lbs - D. A pickup truck towing a flatbed trailer totaling 15,000 lbs Hint: Class C covers vehicles that may not be exceptionally heavy but carry passengers or hazmat. Explanation: A Class C CDL is required for vehicles designed to transport 16 or more passengers (including the driver) or vehicles placarded for hazardous materials that do not meet Class A or B requirements. ### 3. What does the X endorsement on a CDL allow a driver to do? - A. Drive extra-long combination vehicles only - B. Haul hazardous materials in a tanker - C. Operate vehicles with air brakes - D. Pull triple trailers Hint: The X endorsement is a combination of two individual endorsements. Explanation: The X endorsement is a combination of the H (Hazardous Materials) and N (Tank Vehicle) endorsements, allowing a driver to haul hazardous materials in a tank vehicle. ### 4. At what gross vehicle weight rating (GVWR) is a CDL required for a single vehicle? - A. 26,001 lbs or more - B. 10,001 lbs or more - C. 18,001 lbs or more - D. 33,001 lbs or more Hint: There is a specific weight threshold that triggers the CDL requirement for a single vehicle. Explanation: A CDL is required for any single vehicle with a GVWR of 26,001 lbs or more. Vehicles below this threshold typically require a standard commercial or non-commercial license depending on the state. ### 5. If the previous driver's DVIR lists a defect that has been certified as repaired, what must the current driver do? - A. Refuse to drive until a mechanic re-inspects the vehicle - B. File a new report with the FMCSA - C. Review the report, confirm repairs, and sign the DVIR - D. Call the previous driver to verify the repair was made Hint: When the previous driver reported a defect, the current driver must verify the repair before driving. Explanation: The current driver must review the previous DVIR, confirm that any listed defects have been repaired or are noted as not needing repair, sign the report acknowledging they reviewed it, and conduct their own pre-trip inspection. ### 6. What is the federal maximum gross vehicle weight for a commercial motor vehicle on interstate highways? - A. 100,000 lbs - B. 60,000 lbs - C. 80,000 lbs - D. 90,000 lbs Hint: There is a maximum total weight for commercial vehicles on interstate highways. Explanation: The federal maximum gross vehicle weight for commercial motor vehicles operating on interstate highways is 80,000 lbs. Some states may issue overweight permits for loads exceeding this limit. ### 7. Most CDL drivers are now required to use which device instead of paper logbooks to track their hours of service? - A. A GPS navigation system - B. A dashboard camera (dashcam) - C. A smartphone app approved by the driver's company - D. An Electronic Logging Device (ELD) Hint: Paper logbooks have been largely replaced by a mandatory electronic system for tracking driving hours. Explanation: The ELD mandate requires most commercial motor vehicle drivers to use Electronic Logging Devices to record their hours of service automatically. ELDs connect to the vehicle's engine to record driving time accurately. ### 8. Under the 60/70-hour rule, a property-carrying CMV driver who has worked 70 hours in 8 consecutive days may not drive again until: - A. They have taken at least 10 consecutive hours off duty - B. Enough hours fall off, or they take a 34-hour restart - C. They have taken a 30-minute break - D. They obtain a waiver from their employer Hint: The 60/70-hour rule limits total on-duty time over a rolling period, but there is a way to reset the clock. Explanation: Once a driver reaches 70 hours of on-duty time in 8 days, they cannot drive until hours fall off the rolling 8-day period, or they take a valid 34-hour restart to reset the clock. ### 9. What is the maximum blood alcohol concentration (BAC) at which a CDL holder can legally operate a commercial motor vehicle? - A. 0.02% - B. 0.08% - C. 0.06% - D. 0.04% Hint: CDL holders are held to a stricter blood alcohol standard than regular drivers. Explanation: CDL holders are subject to a BAC limit of 0.04% when operating a commercial motor vehicle, which is half the standard 0.08% limit for non-commercial drivers. ### 10. A CDL holder convicted of a DUI while driving a CMV for the first time will be disqualified for how long? - A. 6 months - B. 3 years - C. 1 year - D. Life Hint: A first DUI conviction while driving a CMV results in a significant mandatory disqualification period. Explanation: A first DUI conviction while driving a commercial vehicle means a 1-year CDL disqualification under federal rules. If the driver was hauling hazardous materials that need placards, it is 3 years instead. 6 months is too short, and a lifetime ban applies only to a second major offense, not a first. ## More - [Colorado CDL General Knowledge test](https://dmv-iq.com/colorado-cdl-general-knowledge-test/) - [Colorado CDL General Knowledge practice run 1](https://dmv-iq.com/colorado-cdl-general-knowledge-test/test-1/) - [Colorado CDL practice test](https://dmv-iq.com/colorado-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.