# California CDL General Knowledge practice questions (free set) Our California pool has 115 questions, and 45 are written around California. Road rules feature heavily: the special truck speed limit for vehicles with three or more axles, which lanes trucks must use on freeways with four or more lanes, and whether intrastate drivers follow state or federal hours rules. Others cover agencies you will deal with, such as the CHP's weigh and inspection stations, the BIT terminal inspection program, Caltrans permits for oversize loads, and local CUPAs that oversee hazardous materials programs. Interactive version with answers, hints and explanations: https://dmv-iq.com/california-cdl-general-knowledge-test/study/safe-driving-and-cargo/ ## About the California CDL General Knowledge knowledge test - Issuing agency: DMV - Passing score: 80% - Source: the California Commercial Driver Handbook (DL 650) ## Topics covered - California truck speed limit and freeway lane rules - CHP, BIT inspections, Caltrans permits and CUPAs - California 15-hour training and ELDT - Cargo securement and axle weights - DUI, refusal and serious violation penalties - Hazmat routing and placards ## The 10 free questions This set has 60 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. What should you do if your low air pressure warning comes on while driving? - A. Continue driving but avoid using the brakes until pressure rebuilds - B. Increase engine speed to help the compressor build pressure faster - C. Stop and safely park as soon as possible - D. Turn off the air dryer and switch to manual mode Hint: A low air pressure warning while driving requires immediate action to prevent complete brake failure. Explanation: If the low air pressure warning activates, you should stop and safely park as soon as possible. Continued driving risks losing braking ability entirely if pressure drops further, which would engage the spring brakes uncontrollably. ### 2. The longer the combination vehicle, the more the trailer will off-track. What should a driver do when making a right turn with a long trailer? - A. Speed up through the turn to reduce off-tracking - B. Turn the steering wheel quickly to complete the turn faster - C. Turn from the far right lane to minimize the turning arc - D. Swing wide to the left before turning right Hint: Longer vehicles have more severe off-tracking, requiring a specific turning technique. Explanation: With longer combination vehicles, drivers should swing wide or use a jug handle turn, moving slightly to the left before turning right to give the trailer wheels room to clear the curb and any objects on the inside of the turn. ### 3. When inspecting tires during a pre-trip inspection, which condition would require the tire to be replaced before driving? - A. A minor scuff mark on the sidewall - B. Tread depth of less than 2/32 of an inch on a steer tire - C. A tread depth of 5/32 of an inch on a drive tire - D. Slightly uneven tread wear across the tire Hint: Steer tires have stricter tread depth requirements than drive or trailer tires because they control the vehicle's direction. Explanation: Front (steer) tires must have at least 4/32 of an inch tread depth and all other tires at least 2/32. A steer tire with less than 2/32 tread depth is well below the legal minimum and must be replaced immediately. ### 4. What can happen if too much cargo weight is placed on the front axle of a truck? - A. The rear tires will blow out - B. The front tires can fail or steering can be impaired - C. The vehicle will understeer and have difficulty turning - D. The engine will overheat from the extra load Hint: Overloading the front axle affects the most critical vehicle control system. Explanation: Overloading the front axle can cause front tire failure and make steering extremely difficult or unresponsive. Proper weight distribution is essential for safe steering and braking. ### 5. What is the purpose of a header board (headache rack) on a flatbed truck? - A. To provide a mounting point for clearance lights - B. To reduce wind resistance and improve fuel economy - C. To protect the cab from forward-shifting cargo - D. To support tarps covering the load Hint: The header board protects the cab from cargo that shifts forward during braking. Explanation: A header board (headache rack) is mounted behind the cab to protect the driver from cargo that shifts forward during hard braking or a collision. It acts as a barrier between the cargo and the cab. ### 6. When transporting hazardous materials, placards must be placed on which sides of the vehicle? - A. Front and back only - B. Only on the side facing oncoming traffic - C. All four sides: front, rear, and both sides - D. Only on the rear of the vehicle Hint: Placards must be visible from all directions to warn emergency responders approaching from any angle. Explanation: Hazmat placards must be displayed on all four sides of the vehicle, front, rear, and both sides, so that they are visible from any direction. Each placard must be at least 10 3/4 inches square. ### 7. Where must hazardous materials shipping papers be kept while driving? - A. In the glove compartment - B. In the trailer with the cargo - C. In a pouch on the driver's door - D. In a locked box mounted behind the cab Hint: Shipping papers for hazmat must be immediately accessible to the driver and to emergency responders. Explanation: Shipping papers for hazardous materials must be kept in a pouch on the driver's door or in clear view and within the driver's reach while the seat belt is fastened. This allows quick access in an emergency. ### 8. What document should emergency responders consult to determine the dangers of a spilled hazardous material? - A. The vehicle registration - B. The driver's CDL - C. The bill of lading - D. The Emergency Response Guidebook (ERG) Hint: Emergency responders use a specific reference guide to identify hazmat dangers at an incident scene. Explanation: The Emergency Response Guidebook (ERG), published by the DOT, provides first responders with information on identifying hazardous materials and taking immediate protective actions during a hazmat incident. ### 9. At a railroad crossing, a bus carrying passengers must: - A. Stop between 15 and 50 feet from the nearest rail - B. Slow down to 10 mph and proceed if the tracks are clear - C. Only stop if warning lights are flashing - D. Honk the horn and proceed across quickly Hint: Buses carrying passengers must follow stricter rules at railroad crossings than regular vehicles. Explanation: Buses carrying passengers must stop at railroad crossings no closer than 15 feet and no farther than 50 feet from the nearest rail. The driver must look and listen for trains before crossing. ### 10. When driving a large commercial vehicle down a long, steep downgrade, you should: - A. Place the vehicle in neutral to reduce wear on the engine - B. Ride the brakes continuously to maintain a safe speed - C. Use a low gear and apply brakes intermittently with firm pressure - D. Accelerate slightly to maintain momentum Hint: Going down a long grade in a heavy vehicle requires a specific technique to prevent brake failure from overheating. Explanation: On long downgrades, use a low gear to let the engine help slow the vehicle and apply brakes with firm, intermittent pressure. Riding the brakes continuously causes them to overheat and fade, potentially resulting in total brake failure. ## More - [California CDL General Knowledge test](https://dmv-iq.com/california-cdl-general-knowledge-test/) - [California CDL General Knowledge practice run 1](https://dmv-iq.com/california-cdl-general-knowledge-test/test-1/) - [California CDL practice test](https://dmv-iq.com/california-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.