# Alaska CDL Pre-Trip Inspection practice questions (free set) This Alaska pool has 50 pre-trip questions. Brakes and coupling lead with 9 each, then the seven-step method, the engine compartment and tires with 4 each. Air brake checks and in-cab checks have 3, and wheels, suspension, lights and cargo securement have 2 each. Three are written for Alaska, including the low air pressure warning, the build-up time on a dual air system and what a CVSA Level 1 roadside inspection covers. Interactive version with answers, hints and explanations: https://dmv-iq.com/alaska-cdl-pre-trip-inspection-test/study/all-questions/ ## About the Alaska CDL Pre-Trip Inspection knowledge test - Issuing agency: DMV - Passing score: 80% - Source: the Alaska Commercial Driver License Manual ## Topics covered - Alaska road test: DMV, third-party testers and $25 fee - The seven-step inspection method - Brake and air system checks - Coupling, tires and wheels - Engine compartment and in-cab checks ## The 10 free questions This set has 50 questions in total; these 10 are free. The rest are in DMV IQ Pro. ### 1. At what psi should the low air pressure warning signal activate in a commercial vehicle? - A. 40 psi - B. 50 psi - C. 60 psi - D. 55 psi Hint: This warning activates well before the pressure drops to a dangerous level, giving the driver time to safely stop. Explanation: The low air pressure warning signal must activate before the air pressure drops below 55 psi (or one-half the compressor governor cutout pressure on older vehicles). ### 2. During a CVSA (Commercial Vehicle Safety Alliance) Level 1 inspection in Alaska, what is examined? - A. Only the driver's credentials and log - B. Only the vehicle's mechanical condition and tires - C. Both the driver and the vehicle - D. Only the cargo securement devices Hint: The Level 1 inspection is the most comprehensive roadside check, covering both the human and mechanical elements of commercial vehicle operation. Explanation: A Level 1 (North American Standard) inspection is the most comprehensive. It includes a 37-step procedure examining both the driver (credentials, HOS, medical card) and the vehicle (brakes, tires, lights, etc.). ### 3. Which step of the FMCSA seven-step inspection is the parking brake and service brake test? - A. Step 2 - Engine compartment - B. Step 7 - Start the engine and check the brake system - C. Step 3 - Start engine and inspect inside the cab - D. Step 5 - Walk-around inspection Hint: It is the last step, where you confirm the vehicle can stop and steer safely before pulling out. Explanation: Step 7 is the final brake-system check. With the wheels chocked, you test the parking brake by tugging gently against it in gear, then test the service brake for stopping action and for pull. Steering wheel free play is checked earlier, in step 3, inside the cab. ### 4. Per FMCSA, how often must a CDL driver inspect their commercial vehicle? - A. Once per week - B. Before every trip and after every trip - C. Only at the start of each day - D. Only when the vehicle has been flagged for a defect Hint: Inspection is not a one-time event; safety checks bracket every shift and continue while driving. Explanation: Federal regulations require a pre-trip inspection before driving, en-route monitoring, and a post-trip inspection with a written DVIR at the end of each day. ### 5. When inspecting mirrors and windshield during the in-cab check, what is the standard requirement? - A. Mirrors must be tinted to reduce sun glare - B. Only the driver-side mirror must be checked - C. Windshields may have any size crack as long as it is not in the driver's line of sight - D. Mirrors and glass must be clean, adjusted, and undamaged Hint: If you cannot see clearly out of it, it is a defect. Explanation: All mirrors and glass surfaces must be clean and properly adjusted, with no damage or obstructions that impair the driver's view. ### 6. What is the minimum legal tread depth for STEERING (front) axle tires on a commercial motor vehicle? - A. 4/32 inch - B. 2/32 inch - C. 6/32 inch - D. 8/32 inch Hint: Steering tires need DOUBLE the tread of other tires because they handle directional control. Explanation: Steering-axle tires must have at least 4/32 inch of tread in every major groove. ### 7. While checking the wheels and rims, which of the following indicates a defect? - A. Cracked rims, missing or loose lug nuts, or rust trails - B. Lug nuts that are clean and tightened to the specified torque - C. A rim with a uniform painted finish - D. Wheel hubs that show no signs of oil leakage Hint: Rust streaks from lug nuts are a classic warning sign on the skills test. Explanation: Rim cracks, missing or loose lug nuts, and rust streaks radiating from lug nuts (which indicate the nut is loose and moving) are all defects requiring immediate attention. ### 8. During a static air-leak test on a COMBINATION vehicle (tractor + trailer), the maximum allowable air-pressure loss with brakes released is: - A. 2 psi per minute - B. 4 psi per minute - C. 3 psi per minute - D. 6 psi per minute Hint: Combinations have more hoses, so they are allowed slightly more leakage. Explanation: A combination vehicle has more air lines and fittings, so the federal limit is 3 psi per minute (brakes released). Brakes applied raises it to 4 psi per minute. ### 9. Which color is the GLAD HAND coupler for the trailer SERVICE air line, and which color is the EMERGENCY (supply) line? - A. Service = red, Emergency = blue - B. Service = blue, Emergency = red - C. Service = green, Emergency = yellow - D. Service = yellow, Emergency = green Hint: Emergency is the color of an emergency light. Explanation: By convention, the service line is BLUE and the emergency (supply) line is RED. Crossing them prevents the trailer brakes from working correctly. ### 10. What is required on the rear, sides, and front of most trailers for visibility? - A. Decorative paint and chrome trim - B. Only a single red reflector mounted in the center of the rear bumper - C. Reflective tape or reflectors plus working marker and clearance lights - D. Mud flaps only Hint: Reflective tape plus required lighting. Explanation: Trailers 80 inches or wider must have red-and-white conspicuity tape and marker/clearance/identification lights so they are visible at night and from the sides. ## More - [Alaska CDL Pre-Trip Inspection test](https://dmv-iq.com/alaska-cdl-pre-trip-inspection-test/) - [Alaska CDL Pre-Trip Inspection practice run 1](https://dmv-iq.com/alaska-cdl-pre-trip-inspection-test/test-1/) - [Alaska CDL practice test](https://dmv-iq.com/alaska-cdl-practice-test/) DMV IQ builds its CDL questions from each state's official CDL manual and the federal FMCSA rules.